Stihl 012 Bar Stud Stripped - Oversize Available?

[Dirk-O-Rama]

My nearby Stihl repair shop says they don't see an oversize bar stud listed for the 012. Do any of you know if there is one? Failing that, it seems to me that I could use an oversize replacement for another saw having M10 for the powerhead side and M8 on the bar side, even if I needed to file (or have a friend turn) down the collar that I see between the thread sets on studs for larger models.

Any sage advice much appreciated.
Thanks

 

[Mad Professor]

056 is M10/M8. Don't know length or collar sizes 1115 664 2405

 

[Dirk-O-Rama]

056 is M10/M8. Don't know length or collar sizes 1115 664 2405

Thank you! The stud you identified looks workable. I need only file the larger diameter collar portion down to 8mm OD; easily done. Looks like coarse thread so M10x1.5. Time to get a tap.

 

[Mad Professor]

Thank you! The stud you identified looks workable. I need only file the larger diameter collar portion down to 8mm OD; easily done. Looks like coarse thread so M10x1.5. Time to get a tap.

You can probably chuck it in a drill then take the file to it when it's spinning

 

[trappermike]

Or you could spend $20 on a Heli-coil repair kit and make it stronger than stock.