stihl 028 wood boss

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

motter

ArboristSite Lurker
Joined
Sep 17, 2020
Messages
5
Reaction score
0
Location
minnesota
i have a 028 wood boss and i am replacing the oil pump and worm gear i noticed where the worm gear goes into oil pump the small shaft on the oil pump has a flat edge, is there a worm gear made for that type of oil pump with a flat edge inside the hole, or will a worm gear for an 028 with a round hole work
 
There are a couple styles. Throw up a pic. The worm gear is left hand thread.
623aa326605727187f439de62c517538.jpg


Sent from my SM-G965U using Tapatalk
 
here are some pics i hope this will help ( let me know if you need anything more)
sorry here they are
 

Attachments

  • 20200918_170802.jpeg
    20200918_170802.jpeg
    1.2 MB
  • 20200918_184331.jpg
    20200918_184331.jpg
    803.3 KB
  • 20200918_184343.jpg
    20200918_184343.jpg
    1 MB
  • 20200918_184510.jpg
    20200918_184510.jpg
    791.5 KB
  • 20200918_184622.jpg
    20200918_184622.jpg
    897.2 KB
  • 20200918_184702.jpg
    20200918_184702.jpg
    840.1 KB
  • 20200918_184737.jpg
    20200918_184737.jpg
    978.3 KB
  • 20200918_184818.jpg
    20200918_184818.jpg
    907.5 KB
Back
Top