Saw runs pretty strong for an old beater. If you look at the pictures you can see the missing piece at the back of the handle. The handlebar has a little bend to it causing the top cover and air filter cover no to line up correctly. Cylinder had some light scoring when I pulled it so I cleaned it up and installed a new ring on the piston. Exhaust port was cleaned and I opened up the existing outlet of the muffler. It is set up with a 18" bar with 8 pin .325. Asking 200.00 shipped and I will throw in a 036 pro cylinder that is usable. It has one line above the exhaust port but could still be used. Heck I will even throw in a new Meteor piston for the 036 cylinder.
