Stihl 044 Arctic

[Hamp363]

I have a have an old red lever 044 that I would like to convert to an Arctic Version. I know I need the handle bar, switch, flywheel and generator coil. Am I missing anything? Thanks

 

[bigbadbob]

heat foil in hand grip by operator presence lever under the black cover, and the heated carb plate.

 

[pioneerguy600]

Complete wiring harness,its much different than the standard setup.

 

[StoneyMeadowMaple]

Good luck, I remember drooling over those.

 

[Hamp363]

heat foil in hand grip by operator presence lever under the black cover, and the heated carb plate.

I guess it wouldn't be a true Arctic. I am just wanting to put a heated handle on the saw. Would I need the carb heat plate?

 

[pioneerguy600]

I guess it wouldn't be a true Arctic. I am just wanting to put a heated handle on the saw. Would I need the carb heat plate?

I have several Arctics and the heated carb is not necessary for the saw to run. I have often cut when temps were below -20F and the carbs do not ice up. Really the heated handles are the most appreciated when it is wet in the fall temps in the 40`s F.