Sold Stihl 044 Magnum Rebuilt & Ported

[northwest saws]

Next up for sale I have an 044 Mag which has been rebuilt and ported. Muffler is dual port and has been modified. This saw is mostly oem except for the air filter cover, muffler and piston. Has a new Meteor piston with Caber rings, new Reisman dual port muffler and new air filter cover. New bearings, seals, excellent oem crank and many more new parts. PHO sorry no bar. Has a half wrap handlebar. Has the fully adjustable Zama C3M carburetor which has been rebuilt. Has a full face side cover with a "modified chip flap" This saw is a real strong runner and will last for several years! Asking $475 plus the ride. Thanks for looking!

Sent from my SM-N910V using Tapatalk

 

[chipper1]

Next up for sale I have an 044 Mag which has been rebuilt and ported. Muffler is dual port and has been modified. This saw is mostly oem except for the air filter cover, muffler and piston. Has a new Meteor piston with Caber rings, new Reisman dual port muffler and new air filter cover. New bearings, seals, excellent oem crank and many more new parts. PHO sorry no bar. Has a half wrap handlebar. Has the fully adjustable Zama C3M carburetor which has been rebuilt. Has a full face side cover with a "modified chip flap" This saw is a real strong runner and will last for several years! Asking $475 plus the ride. Thanks for looking!

Sent from my SM-N910V using Tapatalk

Whats the flap(yellow dealy) on the back of the clutch cover, cover have damage?
Is there a crack on the front and back of the fuel tank/rear handle?
Which cylinder is it.
Thanks,
Brett

 

[northwest saws]

Whats the flap(yellow dealy) on the back of the clutch cover, cover have damage?
Is there a crack on the front and back of the fuel tank/rear handle?
Which cylinder is it.
Thanks,
Brett

The "yellow dealy" is a homemade chip flap. At some point the posts were busted and a local farmer jury rigged it on there. It's actually quite solid, just looks funny. I call it an Idaho county special There is a little crack at the rear of the tank handle but it's not bad. The cylinder is a newer Stihl variant with horizontal fins. Not a Mahle or Gilardoni. Thanks for asking!

Sent from my SM-N910V using Tapatalk

 

[northwest saws]

There is also a small crack on the neck of the tank. It's also pretty minor but it's there.

Sent from my SM-N910V using Tapatalk

 

[chipper1]

The "yellow dealy" is a homemade chip flap. At some point the posts were busted and a local farmer jury rigged it on there. It's actually quite solid, just looks funny. I call it an Idaho county special There is a little crack at the rear of the tank handle but it's not bad. The cylinder is a newer Stihl variant with horizontal fins. Not a Mahle or Gilardoni. Thanks for asking!

Sent from my SM-N910V using Tapatalk

Thanks, I thought farmers only used bailing twine and fence wire lol.
I appreciate the cylinder answer too.
Did you port it.

 

[northwest saws]

Thanks, I thought farmers only used bailing twine and fence wire lol.
I appreciate the cylinder answer too.
Did you port it.

Hehe no bailing twine on this one. All work done on the saw has been done by me. Additionally I am really happy with how this saw turned out. If I was still single without kids I would probably keep this one.

Sent from my SM-N910V using Tapatalk

 

[northwest saws]

Video of the saw running and cutting.

Sent from my SM-N910V using Tapatalk

 

[northwest saws]

Saw is sold pending funds.

 

[661Joe]

Damn went fast I was literally went to bed to sleep on the decision LOL

 

[tug]

Do you have any picture of the chip flap or explain how you made it? I have a cover that the posts are busted off also.

 

[northwest saws]

Damn went fast I was literally went to bed to sleep on the decision LOL

Hehe yeah the 044's don't usually last too long. I do have an 046 mag that will be available soon. With a full wrap handle and 28" bar

Sent from my SM-N910V using Tapatalk

 

[northwest saws]

Do you have any picture of the chip flap or explain how you made it? I have a cover that the posts are busted off also.

PM sent

Sent from my SM-N910V using Tapatalk

 

[northwest saws]

Damn went fast I was literally went to bed to sleep on the decision LOL

I do have a ported ms460 with full wrap currently available folks wink wink hint hint

Sent from my SM-N910V using Tapatalk

 

[661Joe]

I do have a ported ms460 with full wrap currently available folks wink wink hint hint

Sent from my SM-N910V using Tapatalk

I've got a very mean very pink ms 460 but thank you lol. I've ever owned a 044 and really want one.. it's the saw that I've yet to have

 

[Evan]

Where you located northwest saws.

Im in mtn home

 

[northwest saws]

I'm up in the Lewiston - Moscow area. About 3 hrs from Coeur D'Alene.

Sent from my SM-N910V using Tapatalk

 

[Evan]

My brother lives there also have family in bonners.

That your 460 on craigslist with aftermarket clutch cover?

 

[northwest saws]

I do have it listed on the Lewiston craigslist but mine has an oem clutch cover. Here's the link https://lewiston.craigslist.org/tls/d/stihl-ms460-rebuilt-ported/6484921718.html

Sent from my SM-N910V using Tapatalk

 

[Evan]

Lol that is the one, i assumed it was aftermarket but now i see its a oem cover.

I need to make a trip up there and get some saws.

 

[northwest saws]

Lol that is the one, i assumed it was aftermarket but now i see its a oem cover.

I need to make a trip up there and get some saws.

Oh haha yep it's oem. It's still up for grabs, I also have an 046 mag with 28" bar, new chain and full wrap that I'm putting new bearings and seals in. It won't be ported though, it will be 100% oem though. If you make it up this way you're welcome to come take a look and try out saws anytime!

Sent from my SM-N910V using Tapatalk