Sold Stihl 064

[GoBigBlue1984]

Selling an 064 I bought from a gentleman on the west coast. Nice saw. Runs very well, oils like a champ. Initially, the plan was to swap the stock
cylinder for a ported 066 cylinder and hold on to it. A good friend in Oregon built me a 064/066 hybrid that’s pretty spectacular itself. So this one goes.

Original clutch cover and air filter were nice but I had brand new OEM so I swapped them.

Saw is all OEM best I can see aside from Caber’s.

I’ll offer this saw with a stock OEM cylinder PHO for $600 plus shipping from 42748.

Or I’ll swap out a ported KS non decomp jug. Base/band cut, uppers raised, exhaust widened, ignition advance for $700 plus shipping.

Or I’ll swap out a ported 066/660 top end. Base/band cut, uppers raised, exhaust widened, ignition advance for $760 plus shipping.

Any questions, please ask.

 

[Gear_head13]

Would you ship to Minnesota?

 

[GoBigBlue1984]

Would you ship to Minnesota?

Yessir

 

[Jeremiah]

That's a nice lookin saw!
Bump

 

[Andrew Harris]

Is the saw still available?

 

[GoBigBlue1984]

Is the saw still available?

Yes sir, it is.

 

[GoBigBlue1984]

That's a nice lookin saw!
Bump

Thank you. I agree. This is the second nicest 064 I own. The other has sentimental value as it was gifted to me by a friend from the PNW.

 

[fl cracker]

Pretty saw glws

 

[GoBigBlue1984]

Pretty saw glws

Thank you.

 

[GoBigBlue1984]

$575 plus shipping. Stock 52mm top end.

 

[Andrew Harris]

Hows the compression/wear on the original cylinder compared to the ported 066 top you could swap in? Is the 066 OEM?

Could you ballpark shipping cost to 54703?

 

[GoBigBlue1984]

They are both OEM. I can pull muffler and cylinder if you’d like to see pictures of both the bore/piston of the 52mm top that’s on it now. First I’ll get you a compression reading.

I’ll also post pictures of the OEM top end I will swap out if you’d rather go that route.

 

[WIslxer]

I can't believe this is still here......nice saw.

 

[GoBigBlue1984]

Hows the compression/wear on the original cylinder compared to the ported 066 top you could swap in? Is the 066 OEM?

Could you ballpark shipping cost to 54703?

Ballpark shipping will be around $32 plus another $7 to insure the package.

 

[Andrew Harris]

They are both OEM. I can pull muffler and cylinder if you’d like to see pictures of both the bore/piston of the 52mm top that’s on it now. First I’ll get you a compression reading.

I’ll also post pictures of the OEM top end I will swap out if you’d rather go that route.

I'd like compression and pictures of the 064 for now. Thank you.

 

[GoBigBlue1984]

This saw is sold. Headed out west with ported 660 top end.