STIHL 066 flywheel puller

[old-cat]

Well I got an 066 with toasted piston for repair. It has a plastic? flywheel and my puller for the smaller saws is too small for this one. I searched ebuy, no luck, Bailey's, no luck. HELP!

It looks like it would take the same design as the smaller one.

 

[galde]

Does the flywheel have the female-threaded hub, or is it like the unthreaded plastic-finned flywheel I just pulled off a 460 by using the knocker shaft that screws down over the crankshaft in place of the crank nut?

 

[old-cat]

26 mm threaded female type.

 

[Jacob J.]

The puller for the poly flywheel 066 is the same puller for the MS-650, MS-660, 084, 088, MS-880, 090.

The part number is 1106 890 4501 and they're about $18 at a Stihl dealer.

 

[old-cat]

You're the man Jacob! Thank you.

 

[Grande Dog]

Howdy,
We have it available but, it's high priced.
Bailey's - FLYWHEEL PULLER
I was wondering if you could tell me whether you called and asked, or just searched on the website?
Regards
Gregg

 

[old-cat]

I searched your site. Now it's on the way from my STIHL store.

 

[pioneerguy600]

Greg,.with a little searching you can get the double ended puller that will fit all the Stihl internal thread flywheels for under $20. landed to your door. The motorbike shops use them also.