Selling my hobby saw due to financial stress
Not great cosmetically , but many new parts assembled with blue loctite. I used the original cylinder bolts but a set of 4 new ones are included.
Canadien fellers saw with :
New oem piston, cylinder, rings, circlip and wrist pin. New clutch and clutch side seal. New carburator ( from a 066M ) so grommet does not fit and air filter. Includes a 32" oregon bar with chain ( 050 X 3/8 )
and a stihl 24" bar with two chains ( 063 x 3/8 ).
Has canadien 2 port muffler with some brazing repair.
Replaced one of the bar mount studs, will include a second one.
This saw runs great, I used it for a large pine and a large oak in my backyard. I will refund your money less shipping if not happy.
Barely broken in, run exclusively with high test and 40-1 mx2t.
If interested I have a new crankcase, crank and bearings. Which I bought but the saw does not need.
Includes parts list and repair manual.
Additional high res pictures available , just ask
Make me on offer, must sell..........
Thanks
Not great cosmetically , but many new parts assembled with blue loctite. I used the original cylinder bolts but a set of 4 new ones are included.
Canadien fellers saw with :
New oem piston, cylinder, rings, circlip and wrist pin. New clutch and clutch side seal. New carburator ( from a 066M ) so grommet does not fit and air filter. Includes a 32" oregon bar with chain ( 050 X 3/8 )
and a stihl 24" bar with two chains ( 063 x 3/8 ).
Has canadien 2 port muffler with some brazing repair.
Replaced one of the bar mount studs, will include a second one.
This saw runs great, I used it for a large pine and a large oak in my backyard. I will refund your money less shipping if not happy.
Barely broken in, run exclusively with high test and 40-1 mx2t.
If interested I have a new crankcase, crank and bearings. Which I bought but the saw does not need.
Includes parts list and repair manual.
Additional high res pictures available , just ask
Make me on offer, must sell..........
Thanks
