Sold Stihl bar Extravaganza! Lots of 36 and afew 32". priced at 35 and 40$ plus shipping

[Bill G]

I suspect I have a 32, but not a 40

Please let me know what you have and let's see what type of bulk deal we can do.

 

[david newbie]

How bout 10 bars for 250 plus shipping. Most of them have a small amount of play in the replaceable tips. Singingwoodwacker suggested I could peen the rivets with a ball peen hammer, but I don’t have one and don’t feel like messing with them at that price. I have more than that, but that’s about a 60 pound package

 

[david newbie]

Btw, I don’t think I have any Stihl brand ones left. Mostly Oregon bars. Also have a few bars that fit husqvarna

 

[david newbie]

Btw, I don’t think I have any Stihl brand ones left. Mostly Oregon bars. Also have a few bars that fit husqvarna

Those Stihl mounts are all 3/8, a mix of 32 and 36”

 

[Bill G]

I am still wondering on what exactly you have.

 

[david newbie]

a bunch of mostly oregon bars, 32 and 36, 3/8 some are 063, I don't have a great way to measure the gauge. Are you looking for something in particular?

 

[Bill G]

All of them

 

[david newbie]

I can send you 10 that are 3/8. Do you prefer 36 or 32? I suspect I have more of the 36”

 

[Bill G]

I am interested in all the bars you have left. The pitch, gauge, and brand is not important. At 32 inch and above there are basically three bar mounts. The Oregon D009 which is for the large Husky saws, the 12 mm slot which fits the medium Stihl, and the 14 mm which is for the bigger Stihl saws. You really need to figure out how many of each you have.

 

[david newbie]

I can sell you 10 for 250. Plus shipping. If you want 20, I can do 400 plus shipping. It’s mostly 36” and a few 32s. I would have to ship them in 2 batches of 10. I will go out tomorrow and count how many I have of the Stihl and husqvarna

 

[david newbie]

I’m fairly certain these are all the standard large mount , I will measure a few. The size that 024 and 660 generally use

 

[david newbie]

Total of 27 Stihl mounts and 5 husqvarna. I think they are all 3/8, and a mix of 36 and 32. I can possibly ship them in 3 bundles and still make the 70# limit, although I’m not sure. Let me know. Total would be 640 plus shipping

 

[Bill G]

I will give it some thought.

 

[209CrownKing]

How bout 10 bars for 250 plus shipping. Most of them have a small amount of play in the replaceable tips. Singingwoodwacker suggested I could peen the rivets with a ball peen hammer, but I don’t have one and don’t feel like messing with them at that price. I have more than that, but that’s about a 60 pound package

What do you have left for bars? What kind of condition are they in?

 

[david newbie]

What do you have left for bars? What kind of condition are they in?

Mostly 36” bars, I will have to check what’s left. Are you wanting Stihl or husqvarna? And what length?

 

[david newbie]

I just took a look, appears that I have 5 36' stihl bars and another 5 stihl bars that are about an inch shorter? None of them are stihl branded, appear to be mostly oregon. All in decent shape. I also have 4-5 Husqvarna mount bars in the 34- 36 "" range

 

[Bill G]

Once you figure out what you have left let me know.

 

[blades]

I think husky bars are 36, might be one or 2 32s. I guess I don’t know the difference between 3002 and 3? I rarely use more than a 20” bar

3002 is a large mount for older Stilh ( like 0xx series) newer units ( MSxxxx) use 3003

 

[blades]

a bunch of mostly oregon bars, 32 and 36, 3/8 some are 063, I don't have a great way to measure the gauge. Are you looking for something in particular?

bar gauge should be stamped on bar.

 

[sawmill sam]

Yes it is. It makes no sense but they hammer you on thin boxes

I think its because they require special handling, not conveyor friendly