Stihl bearing ID

[rob066]

I have these Bearing that are similar to a 056 bearing but are smaller. They have the same style seals and have the same step. I'm thinking that there are a late style 031/032 bearing. Stihl part number 9523 003 4440. Both 9523 003 4440 are NOS. One is A 056 bearing and one I think is the 031 /032 are in the pics for comparison.

 

[Tomos770]

Write down those numbers on a last picture

 

[rob066]

Write down those numbers on a last picture

FAG 545652

 

[Tomos770]

Here is 545651...

https://www.ebay.co.uk/p/23022981624
From what I can see imediately is that it is not standard one...

12x32x13.5

I can asume that the same goes with 545652...

Unstandard dimensions on purpose
Buy a Husqvarna instead

 

[hotshot]

Just measure your unknown 032 bearing, it should be 15x35x13.5mm.

 

[rob066]

I already did. Its the guy im sure. It measured 13,5 too the inner race it is a little longer than the outer race

 

[Tomos770]

Can you write down its actual measures?

Maybe you can make one from a standard bearing with a help of a lathe?

Skf 62201 is 12x32x14....maybe you can trim it diwn to 13.5 (a little on a both sides)

Measures are in mm!

 

[rob066]

I already did. Its the guy. It measured 13,5 too the inner race it is a little longer than the outer race

Can you write down its actual measures?

Maybe you can make one from a standard bearing with a help of a lathe?

Skf 62201 is 12x32x14....maybe you can trim it diwn to 13.5 (a little on a both sides)

Measures are in mm!

I dont need it to standard bearing . Im aquiring if it fits an 032. These have value as it is a proprietary bearing to stihl saws with its odd size.

 

[Tomos770]

Sorry......I tought that you need a new set of bearings!