Want to Sell Stihl cylinders, handles, crankcases, 064 parts, 044 parts, 025 parts, ms362 parts & more

[northwest saws]

price on 460 piston w/rings?

Check your inbox.

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

More parts. 056 muffler casing and shell are good but the dual port cover has a crack and some rust. 064 cover has a small chunk taken out above the spark plug hole but is otherwise good. Everything else although a little dirty is in good shape and is undamaged. Both ms461 covers are missing the top captive nut. 044 top cover is really nice, a little grime but no damage.

056 Dual port muffler Sold
(2) MS461 top covers $15 each
044 filter base Sold
044 Mag filter cover $15
044 top cover Sold
(5) 064 filter cover(old metal style) $10 each
064 top cover Sold
MS311/391 Top cover $25
046/ms460 Top cover Sold
046 flywheel Sold
046 filter base Sold

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

From an early version ms362 with the older flat type air filter. Serial 289894395

Ms362 air guide shroud part # 1140 120 0901 $10
Ms362 carb bracket part # 1140 120 0901 $5
Ms362 manifold part # 1140 140 2500 $10

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

All parts off of this are spoken for, thanks folks. However, I'm pretty sure I could rustle up 1 or 2 more 064 tanks if anyone needs one.

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

044 Tank Sold
044 Crankcase Sold

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

Glad to see there was so much interest in the 064 parts. At this point all the parts off that 064 carcass are spoken for and will be heading to new homes here soon. Thanks folks!

 

[tspeedle]

Got any full wrap handlebars left?

 

[rocketnorton]

bump for the op
good guy to deal with

 

[northwest saws]

Got any full wrap handlebars left?

tspeedle - only ones I have left I think are for 1128 saws like 044 or 046, no other 064 handles.

Thanks norton!

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

Need folks input here. I have an old KS piston for an 064 but it's beat up a little. Skirts seem good but the top has some wear and a few dings from the saw ingesting something. All that aside piston to Cylinder wall clearance is only .003 and that was tested on a very used 064 cylinder. Ring grooves are also good. Theres a scuff on exhaust side but I can't catch anything with my fingernail. Still I don't think I would personally want to use it. Would you guys use something like this or does it belong in the recycle bin?

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

Some carbs to add. One is a new old stock Bing 49 for the 064. Two Walbro carbs for 064/066 are good but probably need a kit or cleaning. 044 walbro carb is in good used shape. 044 Zama carb is also in good shape and ready to go, passed pressure/leakage test. Chinese carb is for 1128 series saws. All the ms250 carbs and ms170 carb will need kits. One of the ms250 carbs has the fixed high jet.

064/066 Carbs
Bing 49 Nos. $75
Walbro WJ-6A Sold
Walbro WJ-10A Sold

044 & MS440 carbs
Walbro HD-17A $35
Chinese no name New. $10
Zama C3M-S5G. $35

MS250
Walbro WT-283B. $10
Walbro WT-215. $10
Zama C1Q-S75B. $10

MS170
Zama C1Q-S57E. $5

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

044 part out. All of it is sold.

Piston(12mm) & Cylinder Set Sold
Complete Starter Sold
Brake handle Sold
Oil pump Sold
Flywheel Sold
Coil Sold
Coil(without spring+boot) Sold
Top cover Sold
Fuel tank Sold
Spike set Sold
Clutch w/ washer Sold
Clutch Drum w/ small parts Sold
Worm gear Sold
Brake band Sold
Crank 12mm Sold
Muffler Sold
Brake tension spring Sold

Sent from my SM-N970U using Tapatalk

 

[Jordan3605]

Do you have a Stihl MS362 rear handle/fuel tank?
Also need all top plastics as well as loop handle

 

[northwest saws]

Pretty sure I can get a fuel tank next week. I don't think I have the plastics either but could also get those next week. I may have a half wrap handle, I'll have to check. Looks like I should update this thread too!

Sent from my SM-N970U using Tapatalk

 

[northwest saws]

So since I can't go back and edit any of the older posts I will list out what is still available from the pile. All of the MS362 parts are still here, the 025 plastics and cylinder, an 044 starter, and the MS461 piston. The post with the carbs also seems to be correct which includes the new old stock Bing 49 carb for the 064. I am flexible on price too so if it seems too high then make on offer. The most I can do is say no or tell you to G*F*Y*.

 

[Jordan3605]

price on 461 piston?
any 461 cylinders?

 

[northwest saws]

Piston is in good shape but has no rings, how does $25 sound? I am pretty sure that I do have a good 461 cylinder out there. I'll get back to ya on that.

 

[northwest saws]

Found a 461 cylinder, no 362 handle bars though. I'll send you a pm shortly.

Sent from my SM-N970U using Tapatalk

 

[Thumb]

Wondering if you might have some smaller cc parts saws. 028 woodboss WB, 028 AV Super, 024 super.
If you have any huskies, I need a 262 ks cylinder and a HDA 87 carb, a piston for a 254xp, and let me know if you have any echoes please.

 

[northwest saws]

Wondering if you might have some smaller cc parts saws. 028 woodboss WB, 028 AV Super, 024 super.
If you have any huskies, I need a 262 ks cylinder and a HDA 87 carb, a piston for a 254xp, and let me know if you have any echoes please.

No sorry no 028 or 024 parts. I have some 266 cylinders but no 262 or 354.

Sent from my SM-N970U using Tapatalk