stihl ms460/660/880 small slotted screw inner bar plate

[newworld]

inner bar plate there is a small tiny slotted flathead screw that holds the inner bar plate to the case.
i cant seem to find a stihl diagram for this part.
anyone know how to get this tiny screw? its the only screw holding the inner metal bar plate to the saw....

 

[2StrokeFondler]

inner bar plate there is a small tiny slotted flathead screw that holds the inner bar plate to the case.
i cant seem to find a stihl diagram for this part.
anyone know how to get this tiny screw? its the only screw holding the inner metal bar plate to the saw....

Should be 9022 313 0630 for the 880 and 660 and 9041 216 0630 for the 460. It's an M4x8.

 

[newworld]

Should be 9022 313 0630 for the 880 and 660 and 9041 216 0630 for the 460. It's an M4x8.

on ms460 mine is a slotted head not m4, so you take it out with a screwdriver not t27...
im wondering if 90223130630 if the replacement screw for later versions of ms460 and461 etc and 660 and 661?

 

[2StrokeFondler]

on ms460 mine is a slotted head not m4, so you take it out with a screwdriver not t27...
im wondering if 90223130630 if the replacement screw for later versions of ms460 and461 etc and 660 and 661?

M4 says nothing about the head, only about the threads.
I looked at the 460, 660 and 880 parts lists, dont know what 461s or 661s use.

 

[newworld]

ok i understand...so basically looking for a slotted m4 x.7 8mm screw

 

[2StrokeFondler]

ok i understand...so basically looking for a slotted m4 x.7 8mm screw

You're looking for any M4x8 screw. As long as the head isn't significantly bigger, and hits something it shouldn't, you should be good.

 

[newworld]

perfect that makes alot of sense...thanks again for your replies and knowledge.