Swap meet...

[Mastermind]

Still looking for a good flywheel side crankcase half for a poly wheel 066 or 660. Paypal $$$ including shipping to me in the land of Oz. Or swap for NOS 090 ignition/flywheel.

Al.

Your muffler left here today Al.

 

[Axlerod74]

Looking for oil and gas cap for an 031. I'm sure I can come up with a trade or some $$$................PM me if anybody wants to deal.

Stihl looking............

 

[Arrowhead]

I'm looking for some smaller lengths of bulk chain... partial rolls, etc. Ten feet lengths +/- would be plenty.
I could use some .325 in .063 and .050 and 3/8LP in .050. I have plenty junk to trade.

 

[StihlyinEly]

Need 042 filter and filter cover

Just put an 042 tank/handle on an 048S to replace broken one. The 048S filter cover won't mate to the new tank/handle, as you'd expect, so I'm looking for an 042 filter and filter cover. As far as I can tell, with the current 048S filter mounted, there's nowhere for the filter cover to lock onto, so figure an 042 filter might allow the cover to attach that way. PM if interested in trades or $.

 

[sefh3]

Just put an 042 tank/handle on an 048S to replace broken one. The 048S filter cover won't mate to the new tank/handle, as you'd expect, so I'm looking for an 042 filter and filter cover. As far as I can tell, with the current 048S filter mounted, there's nowhere for the filter cover to lock onto, so figure an 042 filter might allow the cover to attach that way. PM if interested in trades or $.

Does your 042 handle have two screw holes for the air filter to attach or does it attach by the 1/4 turn screw? PM sent.

 

[StihlyinEly]

Does your 042 handle have two screw holes for the air filter to attach or does it attach by the 1/4 turn screw? PM sent.

My 048S cover uses the 2-screw method, but the 042 handle has no place for those screws to go. Just got an 042 IPL and see they offered both types of cover for the 042. My new handle/tank uses the 1/4-turn screw. My 048S filter, however, does not have the right kind of mount screw (left-side one) for the filter cover screw to grab, so I'll probably either need the correct style of 042 filter or will have to get the correct screw to put in the filter.

 

[axlr8]

Your muffler left here today Al.

I found you a throttle rod a flywheel(fer that 51/55 your building!), and your 650 super cylinder there mastermind! I wasnt sure if ya saw my original post

 

[Jwalker1911]

Im off to the dealer,I'll keep a look out for anything interesting.....looking for a 044 or 046 project and he has a pile of saws that he aint gonna fix so figured I'd dig around.

 

[thomas1]

Im off to the dealer,I'll keep a look out for anything interesting.....looking for a 044 or 046 project and he has a pile of saws that he aint gonna fix so figured I'd dig around.

If you run across a p/c, for a Solo 603, let me know.

 

[fastLeo151]

nos 046 project

I snagged a set of new 046 cases off eBay for a great price so I am going to do a build with as many new or like New parts as possible. I need everything but the cases. I got some 041, 034, 394, and 066 remnants and some cash to trade.

Thanks

 

[Nardoo]

I need two oil pump shafts for Stihl 046 saws. Maybe some of you have a spare pulled out when you upgraded to a high output unit.
I have plently of Stihl parts to trade, or cash. I won't be paying the dealer $30 for a shaft. They can kiss my white ass.


Tony

Tony,
I think i might be able to help. I have some NOS stuff from a dealer sell out - I will dive in tonight and let you know.

Randy, thanks! Your husky cover is flying over Tahiti at the moment.

Still looking for a fw side case for a 660 (large oil tank) to match this:

Al.

 

[Nardoo]

Like theses, Tony?

Al.

 

[RedneckChainsawRepair]

Whoever PM'ed me about the Echo 6700 670 parts saw, I lost the PM :confused2:. Please resend info. Thanks.

 

[67L36Driver]

I have one Carl,give me a call.

Shoot some rep. at Jim. I'm out of rockets.

Mac 2014 type all healed up.

Carl.

 

[Mo. Jim]

Shoot some rep. at Jim. I'm out of rockets.

Mac 2014 type all healed up.

Carl.

I don't need any rep Carl,I maxed out months ago. I'm just glad the coil was good so I don't have dig out another one.

 

[350jeepcj5]

need a loop of chain:

.325 .050 72, chisel chain please

 

[barneyrb]

I am looking for an old 2 man crosscut saw. Nothing new and need not to have handles and I can even use a broke one as long as I get both pieces. I got bunches of Stihl, JRed, Husky, and Dolmar stuff for trading or may be able to rake you some moldy green paper. TIA....

 

[axlr8]

Bump!!!


Heres my lot of 'stuff' to unload.

74 DL of .325 .063 Oregon chain used

BAR: Oregon EW 160xxxd009 16"? 3/8" sprocket nose VERY light use.

BAR: Oregon 180SLGK095 .050 .325x72DL hardnose, NEW

372 flywheel, slight rub marks, but usable

359 flywheel, Great used.

066 carb (parts)

And a lot of 5 or 6 zama and walbro carbs and pieces.

Looking to trade the carbs as one lot for a WT194

Interested in 026 projects too!

Pm would be Ideal, but Ill check here aswell!

Thanks guys!!!

 

[Arrowhead]

I am looking for an old 2 man crosscut saw. Nothing new and need not to have handles and I can even use a broke one as long as I get both pieces. I got bunches of Stihl, JRed, Husky, and Dolmar stuff for trading or may be able to rake you some moldy green paper. TIA....

I think I have one in the barn. I think the handles were gone and the blade is rusty. You can have it for the shipping if I still have it. I'll check tomorrow.

 

[MechanicMatt]

Im trying to get a old echo 302 back into shape, I need the screw/bolt for the air filter lid. And my caps for fuel and oil are there but chipped. Thanks guys