Swap meet...

[kscycler]

Wrap around handle for 041G

Found a sweet, old 041G yesterday, but it looks like half the wrap-around handle is gone.
View attachment 212458

Have folding green stuff, but also turtle shells....
View attachment 212459

 

[Chris J.]

Ah ok i know a lot of stores that get packing peanuts in.but i always thought they would move a round and let the items fall to the bottom of the box.but i can get some pretty big boxes of them from a few stores that gets them in.they just trow them i trash if they don't use them.i'll go and ask them tomarrow if i can have them before they go in the trash.

Packing peanuts do settle during shipping, and you need to either bag the peanuts, and/or wrap the saw/parts.

 

[Tree Wacker]

Packing peanuts do settle during shipping, and you need to either bag the peanuts, and/or wrap the saw/parts.

ok i'll bag them for the bottom and top and then use some foam for the sides in the box.

 

[plumbcrazyjr]

Found a sweet, old 041G yesterday, but it looks like half the wrap-around handle is gone.
View attachment 212458

Have folding green stuff, but also turtle shells....
View attachment 212459

pm sent

 

[parrisw]

Does anyone happen to know Rick, Wildman1024 on here?

He owes me some stuff and I haven't heard from him in a very long time. I sent a PM and an email and nothing.

He sold all his saw stuff and now into guns. He's been posting a bunch of new video's lately on youtube about all these new guns he's been buying.

 

[DSS]

He sold all his saw stuff and now into guns. He's been posting a bunch of new video's lately on youtube about all these new guns he's been buying.

Thanks Will. I just sent him another email, so we'll see.

 

[andydodgegeek]

Husqvarna 77 parts

Any one have Husqvarna 77 parts? I need a muffler, some handle bar rubber mounts, maybe some decals. I am rebuilding my dads 77 he bought when I was a kid. It was hanging from a rafter in a barn for about 10 years and was extremely dirty. I got it all cleaned up now just need a few items to finish it. I want to make it look real good and suprise my dad by giving it back to him. PM me if anyone knows anything about the parts I need. Thanks.

 

[SawGarage]

I bought a Remington SL-11A in VG+ cosmetic condition on eBay for a great BIN price. The seller removed handle and the b&c, dropped the saw in a box, dropped in the handle and the b&c, dropped in the misc fasteners (loose), put one piece of tape on each end of the box, & didn't tape over the handhold flaps. No padding whatsoever. To make matters worse the paint on Remington chainsaws will peel & flake if you look at it wrong.

That totally SUCKS...


I have a similar experience, but might be a bit more costly...

bought almost 100lbs of saw stuff (good parts saws..) seller loaded them in TWO boxes, with little packing material...

out of 6 good cyl, 4 of them are missing fins 2 broken crankcases, 1 flywheel, 1 coil...

AND, because the SELLER PAID for the shipping ( out of the $$$ I sent him) and he doesn't feel like going through the claims process (although I did 90% of it for him) I'm not ONLY out the saw parts/$$ paid, but the INSURANCE coverage cost :msp_mad:

He sold all his saw stuff and now into guns. He's been posting a bunch of new video's lately on youtube about all these new guns he's been buying.

Wait, didn't I say that?? oke:



Hi Will.

 

[parrisw]

Wait, didn't I say that?? oke:



Hi Will.

LOL, I don't know? Did you?

HI JAY!

 

[o8f150]

I bought a Remington SL-11A in VG+ cosmetic condition on eBay for a great BIN price. The seller removed handle and the b&c, dropped the saw in a box, dropped in the handle and the b&c, dropped in the misc fasteners (loose), put one piece of tape on each end of the box, & didn't tape over the handhold flaps. No padding whatsoever. To make matters worse the paint on Remington chainsaws will peel & flake if you look at it wrong.

i have gotten a couple of saws in the past too that had NO packing at all,, really pissed me off

 

[Chris J.]

That totally SUCKS...


I have a similar experience, but might be a bit more costly...

bought almost 100lbs of saw stuff (good parts saws..) seller loaded them in TWO boxes, with little packing material...

out of 6 good cyl, 4 of them are missing fins 2 broken crankcases, 1 flywheel, 1 coil...

AND, because the SELLER PAID for the shipping ( out of the $$$ I sent him) and he doesn't feel like going through the claims process (although I did 90% of it for him) I'm not ONLY out the saw parts/$$ paid, but the INSURANCE coverage cost :msp_mad:
...

Ouch!! The seller probably didn't want to answer any questions about how he packed the saws.

i have gotten a couple of saws in the past too that had NO packing at all,, really pissed me off

I guess some folks think the carriers treat packages gently and carefully. Hah! I worked with a guy who previously worked for UPS--you don't want to know.

One fellow sent me a saw in a cardboard box that had no rigidity left, I could collapse the box by pushing on the top with one finger. He threw a couple of small wads of newspaper in the box, and crammed the bar in the box. When I got the package there was a tear in the box just about the right size for a bar, and of course no bar. The seller got snitty, said it wasn't his fault "because the bar was in the box when I sent it." The bar was an important part for me, I don't have a large stash of spare bars.

 

[kscycler]

041G for 038 Super

Thanks to everyone who sent me a PM about the 041G. She seems to be all there. Here's what I know, since I only picked it up yesterday:

• 
  The saw is dirty, but it's mostly surface grease. I sprayed it down with degreaser and put a toothbrush to her, and most of the grease came right off.

• 
  The saw has been repainted somewhere along the line. I say that because I see overspray on the handle and on the oil cap.

• 
  The saw is almost completely complete. I think the RH handle is missing, but that may (or may not be) the version. Since I've not had an 041G before, I don't know for sure.

• 
  The air filter is spotty. It doesn't look like my 028 flocked filter, but it is either dirty or some of the coating has come off.

• 
  The bar measures 20" from the end of the gear drive to the end of the bar. The bar is in good shape.

• 
  The chain appears new-ish. Certainly not worn away by any means.

• 
  The saw RUNS. This afternoon, I toothbrushed the grease away and poured out the old gas. I put in fresh mix, and she fired up straightaway. I DID NOT jazz the throttle or rev the saw up, because I just wanted to hear it run first. Maybe that's wrong, but I'm pretty cautious.

• 
  Compression is good, from my perspective. I held the saw up by the starter rope and she just stayed there, for about 10 seconds, and then, slowly, very slowly, eased herself down a bit.

• 
  The oiler works. She pooped on the newspapers after she idled for awhile.

• 
  The spark plug was dry (before I fired it up) and lightly brown. I'm no expert, but there was no big carbon buildup, nor light toasty (lean, to me) look to the plug. Looked OK to me.

• 
  The PO said he took the saw into the local dealer to have it tuned up. There was a service tag on the handle (which I removed when cleaning), but then again, what dealer would leave that much grease on the saw and return it?

• 
  The top cover is not cracked. Funny, it was red on the underneath side, and orange on the top side.

What I really want is an 038AV Super (or thereabouts), electronic ignition, with at least a 20" roller bar. I help my best friend manage about 1,000 acres in SE Kansas and we cut a lot of cedar trees, a lot of oak for his furnace, and an occasional hedge tree. My 028 Super got smashed by a big hedge tree last Saturday and I'm still putting it back together (thanks tomdcoker!).


Thanks again to all who sent me a PM. I'm overwhelmed and want to be straight up and fair to everyone.

UPDATE: Looking for a sturdy box and packing materials. She's on her way to a new home. And an 038 is coming to Kansas! Wooohoo!

 

[SawGarage]

Any one have Husqvarna 77 parts? I need a muffler, some handle bar rubber mounts, maybe some decals. I am rebuilding my dads 77 he bought when I was a kid. It was hanging from a rafter in a barn for about 10 years and was extremely dirty. I got it all cleaned up now just need a few items to finish it. I want to make it look real good and suprise my dad by giving it back to him. PM me if anyone knows anything about the parts I need. Thanks.

I might be able to help here... got some OLD NOS vintage stuff...

LOL, I don't know? Did you?

HI JAY!

YUP!! lol --->

From what I knew, and spoke w/ Rick, he was going in to the GUN hobby... we were speaking about 12ga. shotguns....

Hi Will!

 

[parrisw]

i might be able to help here... Got some old nos vintage stuff...





yup!! Lol --->


hi will!

lol, ok

 

[SawGarage]

lol, ok

oke: :jester:


just pokin' fun.

to make you feel better, I have a spare 372 jug for you

 

[parrisw]

oke: :jester:


just pokin' fun.

to make you feel better, I have a spare 372 jug for you

Don't make me drool! me likey 372 stuff.

 

[Duke Thieroff]

Anyone up for some trading?

Sporting a 28" Mac bar and newer loop of chain.


AV parts are a little rough, may need the chain tensioner looked at, other than that it's a good running saw.

Looking for running saws also that may need a little work or that are good to go.


Let me know what you got.


Chris

Anybody?

Chris

 

[o8f150]

was wondering if anyone had a good oil and gas cap for my huskie 36,, i have a few things to trade and no good green paper

 

[jerrycmorrow]

Anybody?

Chris

don't make me offer you a trade down.

 

[jeepyfz450]

I have a Stihl Rollamatic 10'' carving bar in great shape with a Stihl clutch drum/sprocket and chain. this setup came off a Stihl 180C looking for 24'' bar large stihl mount