Taking Suggestions for Builders for a CS-2511T

[mstang1988]

Looking to get a built 2511T.

- Master Mind
- Westcoast Muscle Saws

Who else should I be looking at? Who has the best recipe for these?

 

[RedneckChainsawRepair]

Jason Egan or Gary Buxton I know do the 2511. Think Gary has a website where you can order the new saw and have ported directly. I know Jason has a website but dont think he has new saws offered like that.
The list is long so you will be in line.

Also might check with Joe and Kevin to well known porters to see if they do the 2511. Think both of these are here. @Red97 @huskihl
Joe's website added below too.

https://eganperformancesaws.com/
https://buxtonworksaws.com/
https://worksaws.com/

 

[huskihl]

Jason doesn’t port top handles. I can but I’m booked for awhile. Joe @Red97 has some earlier openings and can probably get to it sooner.

 

[James Sawyer]

Rich retired from West Coast Saw's in Myrtle Creek Oregon if you are thinking about a saw like he used to build. Give West Coast Saw has other shops but the service at Myrtle Creek is not the same is what I've heard. Its been few years since I've called looking for same Echo 2511T. Cascade Outdoor Power equipment https://cascadeoutdoorpowerequipment.stihldealer.net/ is the closest Echo dealer to me (Great shop by the way) they've seen some issues with that saw. They are not that robust but give they are very light. My search and advice given on this site I broke down and bought a MS 201 T-C-m... great saw don't regret it. If you live in PNW the Oregon Logging Conference is February 23rd thru 25th in years pass there has been some deals on saw there. Rich use to come when Myrtle Creek had a booth... bummer when he retired. My advice buy the MS 201T you drop that 2511T or you get a good swing and that saw get banged you might be buying another saw. I get that 2511T has some awesome videos on that saw which is why I wanted one too! My $.02

​

 

[Jed1124]

Jason doesn’t port top handles. I can but I’m booked for awhile. Joe @Red97 has some earlier openings and can probably get to it sooner.

I saw him using a 2511 he ported in a test log on FB watch this morning. I hadn't heard of him before today coincidently. The saw he was testing sounded incredible. Very impressive for such a small powerhead.

 

[Jed1124]

Jason doesn’t port top handles. I can but I’m booked for awhile. Joe @Red97 has some earlier openings and can probably get to it sooner.

I saw him using a 2511 he ported in a test log on FB watch this morning. I hadn't heard of him before today coincidently. The saw he was testing sounded incredible. Very impressive for such a small powerhead.

My mistake. Jason posted a clip of a 2511 using his pipe. The saw was ported by a guy named Gary Buxton.

 

[Jed1124]

https://buxtonworksaws.com/

 

[huskihl]

I saw him using a 2511 he ported in a test log on FB watch this morning. I hadn't heard of him before today coincidently. The saw he was testing sounded incredible. Very impressive for such a small powerhead.

My mistake. Jason posted a clip of a 2511 using his pipe. The saw was ported by a guy named Gary Buxton.

Doesn’t matter, he’s not on here. No need to recommend someone from another venue when there are folks here that do it that are equally qualified

 

[mstang1988]

Thank you folks for all the advice. I’ll take a look through all the suggestions and contact a few and figure it out.