The Beg for Manuals Thread

Wesspur
Rugged made
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Getting dirty with old saws, looking for a few more manuals:

Stihl 011 AVT- Service manual and IPL
045/056 - IPL
Homelite 330- Sevice and IPL

IMG_7867.JPG

Thanks so much! Mark
 
Hi , does anyone have any shop/service manuals for a early 1989 Husqvarna 288xp or a 281/288 . Im trying to find any extra literature ,schematics, better detailed instructions on reference to installing the plastic worm gear into the oil pump , i have disassembled and assembled a few dozen times now and i can't get the worm gear seated square inside the oil pump assembly , its driving me insane. If i install the worm gear already mounted inside the oil pump assembly i can almost get it seated but then i can't get my seal over the crank cuz the hole on the worm gear has a smaller inside diameter than the inside diameter of the crank seal and i cant get my pop can guide to allow the seal to seat properly with the worm gear on the way . ! So im pulling at the ether here ! Can anyone help in any way or is there literature or directions that exist to help me get passed this seemingly simple but torturous task ?

Sent from my SM-N960U using Tapatalk
 
Rodger Royle said:
Hi , does anyone have any shop/service manuals for a early 1989 Husqvarna 288xp or a 281/288 . Im trying to find any extra literature ,schematics, better detailed instructions on reference to installing the plastic worm gear into the oil pump , i have disassembled and assembled a few dozen times now and i can't get the worm gear seated square inside the oil pump assembly , its driving me insane. If i install the worm gear already mounted inside the oil pump assembly i can almost get it seated but then i can't get my seal over the crank cuz the hole on the worm gear has a smaller inside diameter than the inside diameter of the crank seal and i cant get my pop can guide to allow the seal to seat properly with the worm gear on the way . ! So im pulling at the ether here ! Can anyone help in any way or is there literature or directions that exist to help me get passed this seemingly simple but torturous task ?
Click to expand...
Check your inbox
 
Dibbs said:
Whether you require an Operators Manual, Workshop Manual or Illustrated Parts List this is the place for you

Please list the Manuals you require but no other questions or off topic crap.

Obviously the arboristsite.com Forum does not condone breaking Copyright Laws, but it is up to the individuals involved to stay within the confines of these Laws.

Anyone willing to help the needy, please do not post links to Copyrighted Materials in open Forum.

If this takes off as I hope it will, it may be of benefit to make it "Sticky".

:popcorn:
Click to expand...
Disassembly instructions and parts diagram for Stihl 021, please. Thanks
 

Latest posts

Back
Top