The Unofficial Chainsaw Weight Thread

[nmurph]

Here is a brand new 200T. It was gassed and run at the dealer, then drained and dried.

 

[RedneckChainsawRepair]

I knew the 235 was heavier than the 435, but I can't figure out why. I think it's like 6cc smaller motor.

Thanks for the pics.

235 is Poulan made saw and 435 Husky made.

 

[Modifiedmark]

Here is a brand new 200T. It was gassed and run at the dealer, then drained and dried.

I had one of those in here a while back and forgot to get a weight on it, glad you did.

I am surprised that the 200T is over 1lb heavier then the 192T.

 

[nmurph]

I had one of those in here a while back and forgot to get a weight on it, glad you did.

I am surprised that the 200T is over 1lb heavier then the 192T.

I am working for the Sthil relocation program. This particular saw is headed to the other side of the world.

 

[young]

Here is one I had in here the other day.

MS-192T

Here is a brand new 200T. It was gassed and run at the dealer, then drained and dried.

mostly drained. give or take an oz or so of left over bar oil.

also comparison of 14in e vs e light

 

[nmurph]

Ryobi

 

[67L36Driver]

Remington Pro 88 w/24 roller nose and barely enuff fuel and oil to operate.........................................31#

 

[rsmn]

Stihl 018C with 3909 14" bar and chain. No fluids. Just an ounce or two over 10 lbs.

 

[67L36Driver]

Remington SL-10A w/15" roller nose and full of fuel and oil..........................12# 13oz.:hmm3grin2orange:

Thanks Mark. Thanks Ed.......................

 

[nmurph]

If you are going to post weights in this thread, please post PHO weights. Bars and chains introduce too many variables.

 

[Modifiedmark]

If you are going to post weights in this thread, please post PHO weights. Bars and chains introduce too many variables.

Exactly!!!!!

 

[rsmn]

Jonsereds 049 SP

14 lbs 4 oz.

No bar/chain. Empty tanks.

 

[rsmn]

Husqvarna 65 Practica

15 lbs, 3 oz.

No bar/chain. Empty tanks.

 

[rsmn]

Homelite 150

No Bar, No chain. Empty tanks.

9 lbs, 14 oz.

 

[nmurph]

441C M-tronic

When I got home I rechecked my scale's accuracy (spot-on) and the weight of the saw (identical to the previous weight). I then started checking the saw over only to discover that the saw was fueled and oiled. I had requested that it not be since the saw is going over the ocean and south of the equator. When I picked it up, the owners son volunteered that it was dry. I didn't have any reason to doubt him and didn't bother checking. Once I figured out the problem, I drained the mix and put it into the oil tank to rinse it well. Then I drained the tank well and ran the saw dry (there was .2 ounce difference after I ran the fuel out of the system). The corrected weight is virtually identical to the 441 I previously owned.

I deleted the inaccurate weight and posted the corrected weight.

 

[young]

I was surprised at this saw's weight. I will re-check the scale, but I have weighed several 346's since and they read correctly so I don't have any reason to think this reading was in error.

390

epic failed stihl. hahahaha

 

[SawTroll]

I was surprised at this saw's weight. I will re-check the scale, but I have weighed several 346's since and they read correctly so I don't have any reason to think this reading was in error.

I have my doubts about that scale....

 

[nmurph]

I have my doubts about that scale....

I have verified this scale against the Pitney Bowes postage scale at work more than once. I have a 10lb dumbbell that I have lugged into the office to the strange looks of my co-workers. Each time the scale at home has weighed within a couple tenths of an ounce of the the PB scales. I also weighed two 346's this past weekend and their weights were consistant with what I am used to seeing on 346's. I still have this saw, unfueled in the shop. I will check the saw weight and the dumbbell weight tonight.

 

[young]

..
Husqvarna 346XP NE

Husqvarna 346XP OE

NE

NE part 2

 

[young]

16in bars

es 3/8 .050 as reference.


3/8 .050 small mount powermatch


.325 laminate .058 small mount prolite


.325 .058 total (tsumura) mini nose small mount


3/8 .058 total (tsumura) small mount


winner
.325 .058 total mini nose small mount

some one post up some sugi hara wieghts.