The we need to help Stump rebuild a shop, replace tools, replace saws thread.

[Stumpys Customs]

Stump -


Can ya use a "rock polisher"/ vibrating polisher for the tools you salvaged, or any other needs in the shop? Have an extra - just PM me your addy....

PM sent, PM received, PM sent.
Everybody rep this guy till he can't walk strait.

That shack is going to be preety tight to get a wood burner in there, Is there a wood burner you can run just outside the shop with a blower blowing the hot air into the shop? I've been thinking about something like this for my own shop. It also sounds a little safer, once in a while I'll get a gas leak from something(usually my old honda enduro) and the shop will fill up with fumes.

No wood burner in this thing. It will have an electric, oil filled radiator type heater in it. We have a couple of them in the house & they work really well.

 

[Jacob J.]

At least Stumpy's new shop has a small service door, perfect for dropping off top-handle Poulans.

 

[PJF1313]

PM sent, PM received, PM sent.
Everybody rep this guy till he can't walk strait.

No wood burner in this thing. It will have an electric, oil filled radiator type heater in it. We have a couple of them in the house & they work really well.

Damn !
My AZZZ HURTZ!!!

(ohhhhhhh Eight - keep out of it!!:msp_smile

and I waz trying to be lo-key.....

Thanx Stump!

 

[Stumpys Customs]

At least Stumpy's new shop has a small service door, perfect for dropping off top-handle Poulans.

Thats for when any of the AS midgets stop by.

 

[tbone75]

I don't understand why no one has said it yet?Or I missed it? Stumpcoop customs

 

[ChainsawmanXX]

Stump, I love your house
Im jealous of your chicken coop
Its alot bigger then my shed

 

[Dan_IN_MN]

I don't know how cold it gets in MO.....but would in floor heat in the new shop be a consideration? I know $$$ but…. Do it once do it right…. Just a thought.. Is a new slab going to be poored?

 

[Dan_IN_MN]

No, Thats my house.LOL

......

What year was it built? That thing has a lot of history! There aren't any more left around my area. They either got burnt down...(kids) torn down....or moved to a history site......

 

[Stumpys Customs]

I don't know how cold it gets in MO.....but would in floor heat in the new shop be a consideration? I know $$$ but…. Do it once do it right…. Just a thought.. Is a new slab going to be poored?

That would be awsome, but prolly not in the budget.

What year was it built? That thing has a lot of history! There aren't any more left around my area. They either got burnt down...(kids) torn down....or moved to a history site......

It's not that old, only around 20 years old I think. Just looks really old.

 

[Smittysrepair]

Dont knock the chicken coop. When I get the chance to work at home I work out of an old chicken/broiler house with a dirt floor, leaking roof, and one end of the building torn off due to trying to salvage steel trusses to build a new shop. I was never able to come up with the cash to build the new shop so I have wound up doing mobile repair work and welding out of a service truck. My shop is usually wherever something breaks down. This time of year a warm/dry place to work is just a dream. Thank god that is just my part time job now.

 

[tbone75]

The coop is the same size of my shop LOL The big stuff I have to do outside! That little place is my wood shop,saw shop and knife making shop LOL

 

[Mill_wannabe]

At least Stumpy's new shop has a small service door, perfect for dropping off top-handle Poulans.

I think that's an exit. For mini-macs. Goes straight to a scrap pile.

 

[Mill_wannabe]

I don't know how cold it gets in MO.....but would in floor heat in the new shop be a consideration? I know $$$ but…. Do it once do it right…. Just a thought.. Is a new slab going to be poored?

That's Phase II - Stumpy's expansion! Right now the focus is getting back to work.

 

[WKEND LUMBERJAK]

PM sent, PM received, PM sent.
Everybody rep this guy till he can't walk strait.



Got him

 

[o8f150]

Thats for when any of the AS midgets stop by.

now that is funny as sh** you must be referring to brad,,terry and jeremy:msp_scared::msp_scared:

 

[o8f150]

At least Stumpy's new shop has a small service door, perfect for dropping off top-handle Poulans.

or echos

 

[Work Saw Collector]

I got my list all straight with what he sent me last night.

2,359.00 I am very thankful guys.

I'll go back and get some info and do some reposting.

 

[Work Saw Collector]

Teaser pic from Duke, until the raffle starts.

Nice looking saw man.

OK guys I got it listed on ebay here is the link I sure hope it does good

Husqvarna 261, 262 XP Chainsaw With 20 inch bar and chain | eBay

For anyone here on AS that might be interested here is the link to the original thread when I bought this saw and did the conversion

http://www.arboristsite.com/chainsaw/159131.htm

I've put this saw on ebay for the cause.

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

I'll send to proceeds to Stumpy...

PayPal email addys

[email protected]
[email protected]

Now the raffle has, a 925, 075, 10-10 and a 32" Husky mount bar. 10.00 just keep Paypaling Stump. I'll bring it forward here in a few. He is sending me the paypal info so I'll make tickets this weekend for all those that have already donated. We will go with Jan. 31 7 PMish. First name drawn gets choice, and so on till we run out of stuff.

No mention of raffle or tickets just paypal as a gift and put your AS username in the note place.
[email protected]


[email protected]

We have got donations already with no AS user name no big deal if you win I'll call you out by real name.

There is also a 372 build going on that will be Stumps saw.

Here is some info, There has been other donations as well. I wont list them all guys this thread is worth reading the whole thing. AS is a hellava site.

There may be another raffle ECSaws/RiverRat/Terry for the Dolmar, More info on that later.

There is two saw builds going on that the saws will be sold money going to stump. A 090G and a Contra more info when that get closer.

$2,359.00

 

[Work Saw Collector]

I know the raffles are fun. I have a good time in all the past threads even if I didn't win, but its more about the money donated to the good causes we back here on this site.






Edit: I wont be around much today but PM away anyhow, I'll get back with you.

 

[andydodgegeek]

I am uncertain is there a raffle already going on? If so how can I get a ticket or get in on it?