The we need to help Stump rebuild a shop, replace tools, replace saws thread.

[nmurph]

ahhh, humor/humour, lol. I had my brain stuck there and couldn't figure out an alternative. I agree with you 100%, but then I'm really a 13 year old boy trapped in a man's body, so everything sounds "wrong" to me.

...and I'm a lesbian, trapped in a man's body.

 

[jerrycmorrow]

Hope ya'll don't mind me postin pics of my progress.

I've got electric now Just got a shop light & the compressor hooked up for now.
Put some plexiglass in the window openings. Already feelin a bit more cozy.
Checked on some used trusses for the new shop:msp_thumbup:
<a href="http://s772.photobucket.com/albums/yy4/stump7997/shop/?action=view&amp;current=shop024.jpg" target="_blank"><img src="http://i772.photobucket.com/albums/yy4/stump7997/shop/shop024.jpg" border="0" alt="Photobucket"></a>

are you kidding? this is the "...rebuild a shop..." thread. definitely show progress pix. also, you should just go ahead and show all the truss pix on this site as well. your mini-shop is looking good. so whatchagonnado with the mini-shop when maxi-shop is up and running?
some questions. how do the truss spans match up to the existing slab? i counted around 10 or 11, is that enough? is any of the sheet metal siding/roof salvageable? i'm assuming the existing slab is usable, correct?
keep us enlightened stump. Merry Christmas to ya's.

 

[o8f150]

...and I'm a lesbian, trapped in a man's body.

we already knew that:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

 

[Danno]

...and I'm a lesbian, trapped in a man's body.

If you were indeed a trapped lesbian, then doesn't that mean you'd not be interested in yer own junk? If so, then you are a better man (i mean lesbian) than I, lol.

 

[muddawg]

and your reason for telling us this is? :msp_lol:

he's tellin' everybody !

 

[Stumpys Customs]

are you kidding? this is the "...rebuild a shop..." thread. definitely show progress pix. also, you should just go ahead and show all the truss pix on this site as well. your mini-shop is looking good. so whatchagonnado with the mini-shop when maxi-shop is up and running?
some questions. how do the truss spans match up to the existing slab? i counted around 10 or 11, is that enough? is any of the sheet metal siding/roof salvageable? i'm assuming the existing slab is usable, correct?
keep us enlightened stump. Merry Christmas to ya's.

11 trusses, the top three will need some repair. That should git me 40' length. I didn't have a tape to measure the trusses. It really doesn't matter, it was just a dirt floor shop anyways.

 

[jerrycmorrow]

11 trusses, the top three will need some repair. That should git me 40' length. I didn't have a tape to measure the trusses. It really doesn't matter, it was just a dirt floor shop anyways.

from the building pic it looks like your walls may be reusable. just hope the trusses will cover the existing span if the walls are sound enough to support trusses. if not, we'll just do some rearranging. just gonna have to get some roofing and garage door?

 

[atvguns]

from the building pic it looks like your walls may be reusable. just hope the trusses will cover the existing span if the walls are sound enough to support trusses. if not, we'll just do some rearranging. just gonna have to get some roofing and garage door?

probably need to start all over them wall are being held up by charcoal might be able to salvage some tin that would be about it

 

[kev1n]

The 090G won't be here until Monday, but the parts are coming in Thanks to everyone that has either provided parts or cash for parts. I'm really looking forward to this build!

Some of those 090G gaskets look identical to the P-62 gaskets I just sent you.

 

[Smittysrepair]

Usually when it comes to building a shop like he needs I have found it easier and cheaper to just start from scratch.

 

[jerrycmorrow]

not seeing it close up i didn't know if the walls were sound or not. ya'll prolly right bout starting from scratch. i know its always simpler than retrofitting unless everything just fits perfect. not too early to start talking bout size, shape, height, openings, lighting, ventilation, power, etc. for the new shop. be nice to at least put compacted crushed stone down for the floor, helps keep the dust down.

 

[blsnelling]

Some of those 090G gaskets look identical to the P-62 gaskets I just sent you.

That's hilarious! I got a couple packages of gaskets and had 090G on the brain, lol. Thanks for the gaskets none the less!

 

[Hank Chinaski]

That's hilarious! I got a couple packages of gaskets and had 090G on the brain, lol. Thanks for the gaskets none the less!

SHOVE 'EM on there, they'll FIT !!!

:hmm3grin2orange:

 

[wendell]

….the only thing I have currently is a bit of hummer!

Well, at least you're getting that. Closest I've been to any action lately is o8 propositioning me in the WTF.

 

[o8f150]

Well, at least you're getting that. Closest I've been to any action lately is o8 propositioning me in the WTF.

hey there big boy

 

[tbone75]

hey there big boy

Look out if he starts the here kitty kitty! :hmm3grin2orange:

 

[Hank Chinaski]

Well, at least you're getting that. Closest I've been to any action lately is o8 propositioning me in the WTF.

and you wouldn't have got that if you didn't post pics of you in the thong doing the macareina

 

[DSS]

Some of those 090G gaskets look identical to the P-62 gaskets I just sent you.

Thats what I thought! I knew that was a Pioneer oil pump gasket.:smile2:

 

[atvguns]

Bumping this to the top

Husqvarna 261, 262 XP Chainsaw With 20 inch bar and chain | eBay

One last bump its almost over

 

[atvguns]

eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices

bump for this one too