Tsumura light & tough vs Husqvarna power match weight comparison

[mdavlee]

I fail to see the point with that.

I like to run .063" chain on the longer bars. It seems to oil a tiny bit better. There's nowhere within 60 miles that I know of that stocks .058".

 

[SawTroll]

Sounds good, but the postage to Norway likely is a deal killer?

Are they 3/8" or .325, I'm only interested if they are 3/8".

I would be interested in one small mount and one large mount 20".....

 

[thechainsawguy]

I got them with .325 but 3/8ths can go on.

Dave.

 

[SawTroll]

I got them with .325 but 3/8ths can go on.

Dave.

Are you sure the dl count will be 72 with 3/8"?

 

[thechainsawguy]

I haven't counted them, but the 20 inch 3/8ths chain from my Oregon pro lite 20 inch fit perfect on it. I looked online at the Pro lite specs and the 20 is 72, but I can double check when back in my shop. Dave.

 

[thechainsawguy]

Are you sure the dl count will be 72 with 3/8"?

Yes its 72 in 3/8ths, thanks, Dave.

 

[SawTroll]

Yes its 72 in 3/8ths, thanks, Dave.

Thanks, I assumed it was, since you said it was 81 in .325.

81dl is uncommon for a small mount Husky bar in .325 though (they usually are 78 or 80), which was the background for my question.