U.S. West Coast CARLTON DEALER Pls.

[Creeker]

G'day fellas,

Hoping someone can post an email address for a Carlton stump grinder dealer on your west coast.

Need to get some jack & grinder wheel shaft bearings and belts, local Aus. agents want more than double what I think I can get them in U.S. for.

I've had a look at the Carlton site and didn't locate any dealers list so any help appreciated.

Many Thanks,

Creeker.

(Going bush for couple of days so won't be near PC)

 

[Mowingman]

Order anything you need direct from the Carlton factory. They ship out promptly. That is where I get all my parts from.
Jeff

 

[stumper63]

Carlton dealer Located in Southern Oregon:

Enviro "Chipper" Industries Inc.

By Phone...
541-855-2048
1-800-287-2048
541-855-0255
FAX 541-855-0254

By "Snail Mail"...
9100 Hwy. 234
Gold Hill, OR 97525

By E-Mail...
[email protected]

 

[Creeker]

Many Thanks

Appreciate your assistance Mm & S63, will explore those avenues.

rgds, Creeker.

 

[Plyscamp]

Garvey Equipment
430 S. Pine St.
San Gabriel, Calif. 91776 (Los Angeles)
1-626-285-4150
Ask for John

 

[Creeker]

Thanks Plyscamp, should be right now with three leads.

rgds, Crkr.

 

[abbeystump]

PM follow up.

Hey Creeker
A follow up of my PM.
I have a 1999 2500 which has a new 27 HP motor

1993 model which I stripped down and changed the bearing and pully system.Its been sitting in the shed a few years got it out the shed this week and cleaned up for sale.

Also have a AgtraK SM2 which sold out to Red Roo

This was Agtraks SM1 version of the Alpine ,used it a couple of times but been sitting in the shed since I got the SM2.Hard work to use but more suited for Sydney where access is a problem.

 

[Creeker]

Nice pics mate.

A handy lot of machinery there Abbeystump!

(You'd like the dual wheels on the SP4012 improves traction and stability.)

Re the grease, it says purge daily, I did so and was told that daily meant 6 or 8 hours work. My habit was 'every' day I worked, regardless of hours, didn't think it was possible to overgrease anything - local dealer says he s/t Carlton and they thought it was.

I will change the grease I use though.

The cover over the outside bearing on the cutter wheel shaft is a good idea and I'll think about doing it also.

all the best, Crkr.

 

[Creeker]

G'day folks,

Can anyone please advise if Enviro Chipper is still open for business, had some difficulty with an email not being replied to.

Thanks :msp_smile:

 

[stumper63]

Just called the 1 800 # above and got their machine, so guess you better call them for quicker response.

Stumper63

 

[Eq Broker]

Hi Creeker,

I carry everything you need. I have the 1 7/16" bearings and the poly chain belt in stock as well. I can ship this by DHL and you'll have it in 3 days. Send me a pm and I'll get you a freight quote as well.

Thanks,
Dave Wild
Global Equipment Exporters
770-966-9056

 

[Creeker]

Many thanks Stumper 63, I had also left a message on their machine....still no reply.

Good to hear from you Dave, I'll get a PM on the go now, thanks for the reply.

 

[paccity]

enviro chipper sometimes it is hard to get them this time of year. i have dan's cell # . even then it 's not a guarantee? took me two week's to get the rite hyd pump for my morbark 2400 . but a lott of that was morbark's prob.

 

[Creeker]

Thanks paccity, seems that way, all the best for your summer, we are heading for Winter and snow is forecast on the peaks over 1200m at the moment. Happily we are only 150m and it was 16C here today.

Lit the slow combustion wood heater tonight though, nice bit of red gum - a eucalypt of renown for heat production is in it.

 

[Creeker]

Many Thanks !

Thanks for the help fellas, much appreciated, end up with a very good price.

Excellent quotes from all businesses involved :msp_smile: