V twin

[calefever7]

Hi I have a V twin chariot that is 22 hp. It recently was firing on one piston until I redid the armature gaps on the flywheel and cleaned magnets. It ran good and had good power for about 100 yards of mowing it seems until it got warm and bogged down a lot. I mowed a little bit and it stayed bogged down but it idled fine once the blades were turned off. Any help would be appreciated thanks


Sent from my iPhone using Tapatalk

 

[calefever7]

Any help


Sent from my iPhone using Tapatalk

 

[066blaster]

Not sure how old of a machine your talking about. But on my modern zero turn motors grass clippings sometimes flies in where the plug wires attach to the plugs and will foul out a cylinder. And of course check the plugs themselves. Plus take a pliers and squeeze the the metal on the plug wires where it attaches to the plug to make sure it's tight. Those are the easy fixes, if it's something else ,,good luck. Make sure choke is working properly and....make sure air filter is clean, that can make a huge difference. Are your blades sharp?

 

[calefever7]

Thank you and yes the blades are sharp


Sent from my iPhone using Tapatalk