minus chain #14, found a use for it...
bump
bump
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Trade VF grab-bag chains TRADE thread
- Thread starter Mattyo
- Start date
Help Support Arborist Forum:
15:
78 DL 325 050 two chains, not sharp, one is S/C non safety, the other is f/c safety
16:
72dl 325 058 f/c non safety, sharp
17:
56dl 3/8 050 low pro, safety s/c not sharp
18:
70dl 3/8 050 semi chisel, safety, sharp
19:
66dl 325 058 semi chisel, non safety, not sharp
again, I don't have use for any of these, just looking to trade for something useful ... anyone?
78 DL 325 050 two chains, not sharp, one is S/C non safety, the other is f/c safety
16:
72dl 325 058 f/c non safety, sharp
17:
56dl 3/8 050 low pro, safety s/c not sharp
18:
70dl 3/8 050 semi chisel, safety, sharp
19:
66dl 325 058 semi chisel, non safety, not sharp
again, I don't have use for any of these, just looking to trade for something useful ... anyone?
Shawn Curry
ArboristSite Operative
I'd be interested in the 063 gauge chains, both the 3/8 and .325 full chisel full comp. Numbers 5, 7, and 11 on your list. I've already gotten rid of most of my non 063 gauge stuff, so unfortunately I might not have anything you'd want in trade. I do have a partial 25' reel of oregon 404 skip, and I could probably spin a loop any size you need. Or if you'd like to sell, shoot me a PM.
Hmm...I don't run 404.
Not sure it makes sense to sell or trade only 3 at a time though. ..
Anything else to trade?
Bars 372 350 346xp 394 262xp etc...
Not sure it makes sense to sell or trade only 3 at a time though. ..
Anything else to trade?
Bars 372 350 346xp 394 262xp etc...
Shawn Curry
ArboristSite Operative
Team Stihl here... I've got a 3003 mount, 28" 3/8 063 Oregon reduced weight and 3-4 chains for that, all round filed 10 degrees for milling. I don't run that setup as much anymore as I'm starting to prefer 404.
I'm looking to make them into some playtime chains. I could trade cash, then you could trade that for stuff that you want.
I'm looking to make them into some playtime chains. I could trade cash, then you could trade that for stuff that you want.
Attachments
When I get my hands on the chains later I'll get back to you, but if its just 3 chains, $30 shipped?
Chains 5 7 11 12 are gone....thanks shawn!
moved the numbers around a bit...this is what is available a/o 8/10/16
1. Stihl 3/8 050 lo pro 56dl sharp non safety
2. Stihl 3/8 050 81dl full chisel non safety sharp
3. Stihl 3/8 050 60dl full chisel non safety sharp
4. Oregon 3/8 050 60dl semi chisel non safety sharp
5. 78 DL 325 050 two chains, not sharp, one is S/C non safety, the other is f/c safety
6. Oregon 3/8 050 72V 64DL full chisel vanguard type raker sharp
7. Oregon 3/8 050 56dl low pro, safety s/c not sharp
8. Husky 3/8 050 60dl semi chisel sharp non safety
9. Windsor 3/8 058 67dl full chisel sharp non safety
10. Oregon 3/8 050 84dl full chisel sharp non safety SKIP
11. ? 325 058 72dl f/c non safety, sharp
12. Oregon 3/8 050 70dl semi chisel, safety, sharp
13. Mucculoch? 3/8 058 61dl semi chisel sharp
14. SW brand 66dl 325 058 semi chisel, non safety, not sharp
1. Stihl 3/8 050 lo pro 56dl sharp non safety
2. Stihl 3/8 050 81dl full chisel non safety sharp
3. Stihl 3/8 050 60dl full chisel non safety sharp
4. Oregon 3/8 050 60dl semi chisel non safety sharp
5. 78 DL 325 050 two chains, not sharp, one is S/C non safety, the other is f/c safety
6. Oregon 3/8 050 72V 64DL full chisel vanguard type raker sharp
7. Oregon 3/8 050 56dl low pro, safety s/c not sharp
8. Husky 3/8 050 60dl semi chisel sharp non safety
9. Windsor 3/8 058 67dl full chisel sharp non safety
10. Oregon 3/8 050 84dl full chisel sharp non safety SKIP
11. ? 325 058 72dl f/c non safety, sharp
12. Oregon 3/8 050 70dl semi chisel, safety, sharp
13. Mucculoch? 3/8 058 61dl semi chisel sharp
14. SW brand 66dl 325 058 semi chisel, non safety, not sharp
fearofpavement
Trying them all
So what you need Mattyo isn't to trade chains, it's to get a breaker spinner combo and turn what you have into what you need. A better long term solution even though it won't benefit the USPS.
I happen to have a nice breaker/spinner available so if you're interested, PM me. (It's a Foley Belsaw brand).
I happen to have a nice breaker/spinner available so if you're interested, PM me. (It's a Foley Belsaw brand).
Just bought a spinner on ebay...oregon brandy new, $70 or so including ship.
now I need a breaker ideally. would be happy to trade chains for a breaker.
and yes, Shawn I used the $$ from the chains to buy the spinner, thanks again!
now I need a breaker ideally. would be happy to trade chains for a breaker.
and yes, Shawn I used the $$ from the chains to buy the spinner, thanks again!
updated, added a few more and i've made sure hit all of these w/ the grinder. again, rakers will need to be adjusted to suit.
baggy 5 and 15 have two chains per bag, the others are singles
1. Stihl 3/8 050 lo pro 56dl sharp non safety
2. Stihl 3/8 050 81dl full chisel non safety sharp
3. Stihl 3/8 050 60dl full chisel non safety sharp
4. Oregon 3/8 050 60dl semi chisel non safety sharp
*5. 78 DL 325 050 two chains, sharp, one is S/C non safety, the other is f/c safety *
6. Oregon 3/8 050 72V 64DL full chisel vanguard type raker sharp
7. Oregon 3/8 050 56dl low pro, safety s/c sharp
8. Husky 3/8 050 60dl semi chisel sharp non safety
9. Windsor 3/8 058 67dl full chisel sharp non safety
10. Oregon 3/8 050 84dl full chisel sharp non safety SKIP
11. ? 325 058 72dl f/c non safety, sharp
12. Oregon 3/8 050 70dl semi chisel, safety, sharp
13. Mucculoch? 3/8 058 61dl semi chisel sharp
14. SW brand 66dl 325 058 semi chisel, non safety, sharp
*15. CM # 91 chain 3/8 050 48dl low pro safety semi chisel sharp, and one chain of non safety, sharp, unbranded*
16. oregon 91 chain 3/8 050 62dl low pro semi chisel, skip chain, sharp
17. oregon 33 chain .325 058 78dl chisel, safety, sharp
this should be it for the random lot. 19 chains total. let me know what they are worth, prefer to trade the whole lot at once!
baggy 5 and 15 have two chains per bag, the others are singles
1. Stihl 3/8 050 lo pro 56dl sharp non safety
2. Stihl 3/8 050 81dl full chisel non safety sharp
3. Stihl 3/8 050 60dl full chisel non safety sharp
4. Oregon 3/8 050 60dl semi chisel non safety sharp
*5. 78 DL 325 050 two chains, sharp, one is S/C non safety, the other is f/c safety *
6. Oregon 3/8 050 72V 64DL full chisel vanguard type raker sharp
7. Oregon 3/8 050 56dl low pro, safety s/c sharp
8. Husky 3/8 050 60dl semi chisel sharp non safety
9. Windsor 3/8 058 67dl full chisel sharp non safety
10. Oregon 3/8 050 84dl full chisel sharp non safety SKIP
11. ? 325 058 72dl f/c non safety, sharp
12. Oregon 3/8 050 70dl semi chisel, safety, sharp
13. Mucculoch? 3/8 058 61dl semi chisel sharp
14. SW brand 66dl 325 058 semi chisel, non safety, sharp
*15. CM # 91 chain 3/8 050 48dl low pro safety semi chisel sharp, and one chain of non safety, sharp, unbranded*
16. oregon 91 chain 3/8 050 62dl low pro semi chisel, skip chain, sharp
17. oregon 33 chain .325 058 78dl chisel, safety, sharp
this should be it for the random lot. 19 chains total. let me know what they are worth, prefer to trade the whole lot at once!
Brandon Bondeson
chainsaw guru
so if im understanding this correctly you are trading unwanted chains for wanted chains?
That's the idea...yes
Isn't that why anyone makes a trade of any kind? Get rid of what's unwanted for something that is?
Brandon Bondeson
chainsaw guru
do you have any 18'' 3/8 drive 68DL 0.058 guage chains i might have some junk/unwanted chains
I have what is on the list to trade.
73lgx068g is what you are looking for 68dl 058 ....my dad uses that size so if I had some I'd be keeping them.
my "best case" scenario for this grab bag/ trade is simple. to trade my unwanted chains for a few chains that I can actually use. the guy that gets my grab bag of chains then adds to it and subtracts as he needs, then trades to the next guy, round robin style. eventually there will be a huge box of chains going around.
alas....it has not happened. everyone seems to want to trade for a specific chain, which is silly because shipping a single chain is insane due to the cost of shipping. oh well
73lgx068g is what you are looking for 68dl 058 ....my dad uses that size so if I had some I'd be keeping them.
my "best case" scenario for this grab bag/ trade is simple. to trade my unwanted chains for a few chains that I can actually use. the guy that gets my grab bag of chains then adds to it and subtracts as he needs, then trades to the next guy, round robin style. eventually there will be a huge box of chains going around.
alas....it has not happened. everyone seems to want to trade for a specific chain, which is silly because shipping a single chain is insane due to the cost of shipping. oh well
Shawn Curry
ArboristSite Operative
I got a big box of these chains from Matt a couple months ago. They were not "junk" chains by any stretch - most still had 80-90% life on them.
Did you ever get a breaker, Matt? That's the best (perhaps the only?) way to deal with a random lot of chains like this.
You'd hope a "chainsaw guru" would own a complete set of tools for "chains", and could handle adding 1 DL to #9. (3/8 058 67DL) Perhaps that is expecting too much.
Did you ever get a breaker, Matt? That's the best (perhaps the only?) way to deal with a random lot of chains like this.
You'd hope a "chainsaw guru" would own a complete set of tools for "chains", and could handle adding 1 DL to #9. (3/8 058 67DL) Perhaps that is expecting too much.
I haven't gotten a breaker yet.
I really don't want to mess with these any more than I have. I've spent some hours sharpening them.....so it would be nice to have someone take these off my hands in favor of a few chains that I can use without adding or sub links.
I really don't want to mess with these any more than I have. I've spent some hours sharpening them.....so it would be nice to have someone take these off my hands in favor of a few chains that I can use without adding or sub links.
ChoppyChoppy
Tree Freak
You can just use a grinder and grind off the heads of the rivets and then use a punch. Bit more work than a breaker, but it still works fine.
Yeah...that's what I was planning on doing....would be nice to have a real breaker though.
I can't believe nobody has offered me ANYTHING for these chains ...
I can't believe nobody has offered me ANYTHING for these chains ...
