Vintage Chainsaw Collectors Lounge

[46 Poulan]

Neil said rock and roll will never die--Sure has changed along with country music as I have known.

 

[46 Poulan]

Any new vintage saw guys reading this thread--keep reading--mostly old saw talk-problems and repair tips-but sometimes when I feel like it I ramble a bit--Disclaimer--Kensie is prez-anythying I say,do or talk about represents him or his thread(dang lawers and lawsuits) Gotta watch out for the guys in white coats-Irs and people that do not want me to have saws with no chainbrakes or arrrrr the dreaded bow saws

 

[astnmacgto]

Why you sharing this you're killing me link it

It's already gone lol, that was fast

 

[Kensie1988]

Dang EPA and OSHA ruining everything.

 

[Mac&Homelite]

Here's the 10-10 link.
https://minneapolis.craigslist.org/ram/tls/5976940242.html

 

[astnmacgto]

Here's the 10-10 link.
https://minneapolis.craigslist.org/ram/tls/5976940242.html

Doesn't look too bad, I bet cody would love to have that bar scabbard @Boomer 87

 

[46 Poulan]

Maybe I could write a book--Nah---I am gettin Swamp camp fever--THis always happens--Man you have not lived till you go way out in the swamp in a 14ft. john boat --1947 Johnson motor pushing it.The nature--big old cypress trees,spanish moss,lily pads--water like coffee from tanic acid in trees--They say you can drink it so pure and clean. Alligators from 6 inch baby to 15 foot gramps.Hope to catch some fish--They have a nice fish cleaning station. At night it cools off. Get camp fire going ,light up colemans(some from the 1940s)Light up kerosene road flares me and my son restored. You can't believe how bright the stars are and how many you can see because of no light polution from cities.After shower warm feet by fire-sit in lawn chairs and talk guy stuff.. read my books by coleman light about navy seals,vietnam ,snipers etc. eating good--grilling,dutch oven good stuff. No clock-phone -tv radio--Forget the outside world-quit shaving may wear overalls every day-comfortable you know. Think about the people that use to live out here-familys..A most special place to be for me--David --Over and out

 

[46 Poulan]

Doesn't look too bad, I bet cody would love to have that bar scabbard @Boomer 87

That bar scabbard would look great on my poulan 361--I hit the link now you are killin me--Does look clean 99 clams--If it were close I would bite

 

[46 Poulan]

out

 

[Mac&Homelite]

Look, we all know not to support each others cad. I posted to give me some relief, and all I get is how I should be buying it. Not helping guys. Lol

 

[LonestarStihl]

Look, we all know not to support each others cad. I posted to give me some relief, and all I get is how I should be buying it. Not helping guys. Lol

Hey if it makes you feel any better I'm biting my lip trying to talk myself out of calling them tomorrow. I'm trying to save for another saw and don't need to buy it but I want it so bad

 

[LonestarStihl]

Look, we all know not to support each others cad. I posted to give me some relief, and all I get is how I should be buying it. Not helping guys. Lol

If you buy it and end up saying man I don't want this anymore I could pretty well guarantee after I purchase my 046 I'd be knocking on your door so to speak lol

And if not me you have several others in here that may

 

[Yukon Stihl]

CAD is a tough mistress to keep down...
Right now i have a PM woodboss waiting for my payment to get shipped,a P61 waiting for my payment to get shipped,a Homelite 1050 Super i haven't seen yet ,had to get it shipped to my Alaska address 3 months ago some people have issues with shipping to Canada.So i got that covered by a friend who lets me use her address.
And maybe a Homelite 450 if the seller can figure out how to bill me.
New week next week Yea... maybe i will take a break...i'm starting to sweat thinking about the saws i could miss.

 

[46 Poulan]

I gotta confess-after mc 7-10 got here little disapointed-Its at work in safety clean wash vat-------all apart to get shield and muffler off-- full gunk/vintage sawdust/grand mas mittens/possum fur and bar oil--I just can't stand for dirty cooling fins--could overheat if it ever runs again.Any way another 7-10 headed my way--Free ship got me--thanks for not asking how much it $ Coworker sees handle mount corrode says parts saw--I will use it til it breaks and meanwhile look for parts saw for block---Did i say need to save $ for swap meet-200$ and camping trip--1 week pay. Cad level 4 Defcon Red--I bet a steady girlfriend would cure all this excess saw buying--HER--David I think you got enough saws-think about your back--I thought we were going out to eat!! ---ME sorry babe low funds and no I already had that saw This hobby trumps all others--Better than collecting matchbox cars-Yes I do--Plus you guys-------are here

 

[LonestarStihl]

CAD is a tough mistress to keep down...
Right now i have a PM woodboss waiting for my payment to get shipped,a P61 waiting for my payment to get shipped,a Homelite 1050 Super i haven't seen yet ,had to get it shipped to my Alaska address 3 months ago some people have issues with shipping to Canada.So i got that covered by a friend who lets me use her address.
And maybe a Homelite 450 if the seller can figure out how to bill me.
New week next week Yea... maybe i will take a break...i'm starting to sweat thinking about the saws i could miss.

Wow that's awesome! A break? I call that a nap it lasts maybe 30 minutes.

 

[LonestarStihl]

I gotta confess-after mc 7-10 got here little disapointed-Its at work in safety clean wash vat-------all apart to get shield and muffler off-- full gunk/vintage sawdust/grand mas mittens/possum fur and bar oil--I just can't stand for dirty cooling fins--could overheat if it ever runs again.Any way another 7-10 headed my way--Free ship got me--thanks for not asking how much it $ Coworker sees handle mount corrode says parts saw--I will use it til it breaks and meanwhile look for parts saw for block---Did i say need to save $ for swap meet-200$ and camping trip--1 week pay. Cad level 4 Defcon Red--I bet a steady girlfriend would cure all this excess saw buying--HER--David I think you got enough saws-think about your back--I thought we were going out to eat!! ---ME sorry babe low funds and no I already had that saw This hobby trumps all others--Better than collecting matchbox cars-Yes I do--Plus you guys-------are here

So the first 7-10 is a no go and you have another on the way? If that's the case maybe you can use parts from both to make a runner. It's only true worth is what you're willing to pay so don't let anyone tell you what it's "worth" because it's relative.

You just need to find a woman with the same addictions.

 

[LonestarStihl]

Look, we all know not to support each others cad. I posted to give me some relief, and all I get is how I should be buying it. Not helping guys. Lol

I'm still thinking about that 10-10 this morning.

 

[LonestarStihl]

Please pardon my non vintage here. Added dual port and hd2 filter to ms660

 

[astnmacgto]

Please pardon my non vintage here. Added dual port and hd2 filter to ms660

Looks good, for a creamsicle..... and it sounds alright too I guess haha

 

[LonestarStihl]

Looks good, for a creamsicle..... and it sounds alright too I guess haha

You're dead to me