Vintage Chainsaw Collectors Lounge

[2broke2ride]

Pictures? Now you got me really curious.

I would have to tear the carb back out and take it apart...... might have to anyway.
From what I understand, this carb was used on most all small Tecumseh/power products 2 stroke engines like those used in small snow blowers and stuff like that.

 

[2broke2ride]

Picture of the carb kit. Notice the long orange thing? That is supposedly the fuel pump part along with a check valve in the inlet. Also notice the strange needle and seat. The needle spring drops into the carb body, then the needle goes on with the long stem sticking up through the seat which screws in on top of it. Then the diaphragm pushes on that long stem to open the needle.

 

[2broke2ride]

Crappy internet picture showing the inside.

 

[happysaws]

Picture of the carb kit. Notice the long orange thing? That is supposedly the fuel pump part along with a check valve in the inlet. Also notice the strange needle and seat. The needle spring drops into the carb body, then the needle goes on with the long stem sticking up through the seat which screws in on top of it. Then the diaphragm pushes on that long stem to open the needle.

What website is this from? Last one I bought from "Chainsawr" was over $25...

 

[2broke2ride]

Don't know, I just googled it. The kits are everywhere from what I can see. The Oregon kit is the only one I found that has the fuel pump bit. I was told you can get the diaphragm and gasket right from napa.

 

[2broke2ride]

Just looked again. That is forestdepot.com

 

[TRoller]

What website is this from? Last one I bought from "Chainsawr" was over $25...

Carb tech solutions is where I get all my carb kits

 

[LonestarStihl]

I would love to have a bow bar on my 041. I think I'd be a mean machine. I'd take just about any good saw with a bow though

 

[s sidewall]

Me too, as long as it was a good ole Poulan.

Steve Sidwell, Samsung On5 using Tapatalk

 

[astnmacgto]

Sooooo, I've done another thing, don't have it here yet, but I should tomorrow........


I'll give you a hint,

It's gonna take me forever to set all these fence posts.....

 

[happysaws]

Sooooo, I've done another thing, don't have it here yet, but I should tomorrow........


I'll give you a hint,

It's gonna take me forever to set all these fence posts.....

A puppy??

 

[Kensie1988]

Hmmm, I idea lol

 

[astnmacgto]

A puppy??

Funny you say that, I made a promise to my girlfriend that if I got put on midnights once we're married then I would get her a puppy to sleep with..... looks like I might be getting a puppy in the future

 

[LonestarStihl]

Cheaper than babies

 

[Mac&Homelite]

Good evening gents! Got about two hours of trimming in tonight, bonus was that it was a paying customer for once[emoji3]. Now for the fun brush removal on Sat. Pole saw and Craftsman 2.3 came in super handy. Going to be a very busy weekend for me. Send some sanity my way please. Also might get to cut up part of a tree for firewood for a neighbor. No cleanup involved with that one. Oh yeah! Saws are starting to pay for themselves.

 

[s sidewall]

Sooooo, I've done another thing, don't have it here yet, but I should tomorrow........


I'll give you a hint,

It's gonna take me forever to set all these fence posts.....

Got you a gas hole digger.

Steve Sidwell, Samsung On5 using Tapatalk

 

[s sidewall]

Or, did you get some cows.

Steve Sidwell, Samsung On5 using Tapatalk

 

[Mac&Homelite]

Eh, I'm going to guess someone got some more acres of land and needs to fence it in so all the wild chainsaws don't chew up his stand of timber. As you can probably see, I'm worn out and extremely tired! I need to get off of here lol!

 

[s sidewall]

He's got a new to him saw coming and he's out of trees to test it on, so he's gonna plant some fence post to simulate trees.

Steve Sidwell, Samsung On5 using Tapatalk

 

[astnmacgto]

Got you a gas hole digger.

Steve Sidwell, Samsung On5 using Tapatalk

We have a winner! But not just any gas auger, a mcculloch 300 gas auger