whadja do today?

[DR. P. Proteus]

Its not cold enough for liquor and not warm enough for beer so I stopped for a case of wine on the way home, going to make a fishy Caesar tonight accompanied with a California chardonnay then hope to warm my chilly nose betwixt a supple set of asscheeks. They want me back for one more day tomorrow down in that **** hole which I am not thrilled about but that only serves to prove my theory that freewill is an illusion.

 

[KenJax Tree]

Gorman make sure you drop the depth gauges to about .015-.020 too

 

[gorman]

Sooooo, lower???? What are they usually? I just use a flat file to check fhem

 

[KenJax Tree]

Sooooo, lower???? What are they usually? I just use a flat file to check fhem

Usually .025ish so a few more strokes of a file should get it there

 

[DR. P. Proteus]

You gonna clean up all that other crap laying about everywhere in the first couple pics, or just keep rolling along? Looking good.

No, I am just felling and chipping what my little 90 will get, they have been tossing the thing around down there with that monster of a Bobcat and will come in with some kind of brush hog after I leave. They broke the grapple bucket a couple days ago, had it fixed this morning but I wasn't around for any of that.

I think we uncovered an old still condenser, a couple pre-war washing machines, and a promising harrow plow. We built one bridge out of chips and one out of hickory logs.

 

[no tree to big]

Gorman make sure you drop the depth gauges to about .015-.020 too

Sooooo, lower???? What are they usually? I just use a flat file to check fhem

Usually .025ish so a few more strokes of a file should get it there

That would actually be higher so you don't want to take more off

 

[KenJax Tree]

That would actually be higher so you don't want to take more off

Yup you're right brain fart.

 

[Affordabletree]

How do you like that terex chipper chris? And is it a 730 or 750

 

[DR. P. Proteus]

Also, this is the first time wearing chaps.

 

[capetrees]

Also, this is the first time wearing chaps.

except for in the bedroom obviously

 

[KenJax Tree]

How do you like that terex chipper chris? And is it a 730 or 750

That one is a TAC 730 they just bought that a few months ago. I haven't really worked with this chipper much be it seems pretty nice and is much better than the Vermeer they traded in. They must like it though because they want to buy a few more.

 

[jefflovstrom]

Sooooo, lower???? What are they usually? I just use a flat file to check fhem

Use two or three quarters,,seriously.
Jeff

Sooooo, lower???? What are they usually? I just use a flat file to check fhem

Seriously, just use a couple of quarter's.
Jeff

 

[treecutterjr]

Spring has return-eth. Hallelujah, hallelujah!

Dead maple in the a.m. no money for complete removal, so half removal it is.

Rotten sweet gum in the p.m. that went super quick! ! Yyyaaaayyyy! !! Plus I got my stump cutter back!!

I started that stump 3 weeks ago, when my wheel fell off. Finally got back to finish it.

 

[gorman]

Is your wheel still sparking? What caused it to do that?

 

[treecutterjr]

The bigger shaft they replaced wasn't torqued to the correct specs. It was torqued to the smaller shaft specs. So essentially it started screwing out/un-threading from the hydraulic motor. As it slid out more and more it was making contact with the bolts and the side of the machine and stuff. Atleast that's what they told me.

 

[gorman]

Climbed two maples and finished the day by getting a cat out of a tree.

 

[jefflovstrom]

LOL, at first it looked liked you topped them, then I saw your notch,,
Jeff

 

[no tree to big]

That cat looks embarrassed that you caught him

 

[gorman]

That cat smelled like piss.

 

[DR. P. Proteus]

And on the 7th day The Dan didn't even bother getting out of bed... until the liquor store opened.

Finally got out of that hole after 6 days so today I drove around a little bit then came home and passed out from mimosa before noon.