whadja do today?

[acer-kid]

Labor is about $400- $450 to swap out outrigger, or change seals (well worth it to me). Seal kit (I supplied) from Altec was around $150 (LRIII). If the outrigger barrel is rusty and pitted, (which is my problem), no seal is going to hold, you're right there.

**** it then, buy a new truck. Spending money rules.

 

[tree MDS]

**** it then, buy a new truck. Spending money rules.

I already bought a new tractor this year. Bucket is gonna have to wait a bit. Lol. I'll deal with the outriggers, then they'll be good for another 18 years or do. I got that truck under control, and its paid for. Been a long steady war, but I will prevail. This is just one of the last annoying things for a bit. Lol

 

[13TreeWorks]

Labor is about $400- $450 to swap out outrigger, or change seals (well worth it to me). Seal kit (I supplied) from Altec was around $150 (LRIII). If the outrigger barrel is rusty and pitted, (which is my problem), no seal is going to hold, you're right there.

So let me get this straight I'm right about the pitting but I'm still an inbreed hillbilly with no hardhat ....... " professional hydraulic shop "should have told you they were pitted and suggested having them re chromed or replaced depending on cost and down time if they did and you had them just repack it well shame on you if they dident shame on them ..... I know a lil bit about hydraulics but not buckets as I don't have one have no need yet why is it that the outrigger cylinders rust and pit ???

Jesse

 

[tree MDS]

The barrel is the outside of the cylinder, you inbred, limpwristed, part time hilljack!!! No re chroming needed. Stupid ****!! I been doing this **** 28 years, hillbilly inbred, thanks for your input though. Now **** off!!!

 

[tree MDS]

but I do wish we had a young man of your exceptional talent and skillset over this way.

 

[tree MDS]

What is your full time job anyway?

 

[jefflovstrom]

The barrel is the outside of the cylinder, you inbred, limpwristed, part time hilljack!!! No re chroming needed. Stupid ****!! I been doing this **** 28 years, hillbilly inbred, thanks for your input though. Now **** off!!!

A little viscous, eh? or are you drunk?,,,,,,,
Jeff

 

[murphy4trees]

I ****ed a big acer in the ass today. That's what I did.

It ain't that big if you can reach it with that bucket..

ps.. did you miss me?

 

[treebilly]

Had a beautiful day. A shame to remove this big red oak but it was a lot of fun

 

[tree MDS]

A little viscous, eh? or are you drunk?,,,,,,,
Jeff

Getting there now. Was just a little crabby at that point.

 

[JRoland]

Dead sugar pines today. 9 trees, had to fall all but 3 against the lean.

 

[Blakesmaster]

It ain't that big if you can reach it with that bucket..

ps.. did you miss me?

It was big enough, Captain Awesome.

Ps.. Not especially.

 

[13TreeWorks]

What is your full time job anyway?

Welder fabricator / Cutter grind technician / tool inspection / machine setter / line animal I've have a few ..... And I'm sick of it all that's why I'm getting into trees

Jesse

 

[13TreeWorks]

The barrel is the outside of the cylinder, you inbred, limpwristed, part time hilljack!!! No re chroming needed. Stupid ****!! I been doing this **** 28 years, hillbilly inbred, thanks for your input though. Now **** off!!!

So your the cylinder wall itself is rusting through ???? Well of course repacking won't help it you need a new cylinder why dident you just say that .,... Bla bla bla I think it's time for me to go **** myself again .... Considering that this is the whatdja do thread I'm thinking you want me to take pics or a video or something so you can watch honestly why else would you be so adamant about me raw dawgin rosie palmer ?? On the up swing all this fist fornicating is doing wonders for my limp wrist

Jesse

 

[Wayne Wilkinson]

Calm down Jesse, your a new guy. We all caught a rash of **** from the older members when we started posting. Take it with a grain of salt, spoon of sugar, or ignore it... If he doesnt want your advice save your time and post to someone in need of advice your qualified to give... Good luck with your little company. Keep climbing, do it safe and do the job right. May all your tie in points be secure and let the dust fall like snow.

 

[no tree to big]

Wayne I would like to point out our saws should never make dust [emoji39]

Sent from my SM-G900T using Tapatalk

 

[13TreeWorks]

Calm down Jesse, your a new guy. We all caught a rash of **** from the older members when we started posting. Take it with a grain of salt, spoon of sugar, or ignore it... If he doesnt want your advice save your time and post to someone in need of advice your qualified to give... Good luck with your little company. Keep climbing, do it safe and do the job right. May all your tie in points be secure and let the dust fall like snow.

Sry if I seemed irritated or upset but we'll I'm not I find it hilarious that someone can get so upset over something so petty after all it dident this all start back when I ordered from wesspur not tree stuff and saved 20$ .... This morning I took it with a shovel of top soil and finished the disappearing tree act

Jesse

 

[Wayne Wilkinson]

Who got upset over where YOU spend your money? They are close, so I get quicker shipping. Even better deals if I have the time to walk through the door. (hour away) I was just wondering what was cheaper at wespur then treestuff? Nothing I have bought so far. Congrats for finding the best deal you could! Small companies like mine and yours and a few others who visit this site need to be frugal at times. Just not where safety is involved. lol Good luck and let the CHIPS ( thanks no tree) rain on the groundies hard hat.....lol

 

[jefflovstrom]

Big companies need to be frugal too.
Jeff

 

[no tree to big]

Big companies need to be frugal too.
Jeff

Jeff are you the frugalest of them all?

Sent from my SM-G900T using Tapatalk