What's it fit?

[sdt7618]

hi,

Got a couple of chains , Dolmar brand, 3/8 0.05 50dl. what they gonna fit. won't fit my 100 super, it needs 52 links?

any suggestion as to what they will fit, and would it be the same chain thats on the smaller stihls?

Steven

 

[sdt7618]

Somebody must have an idea?

Nobody know?

would it be considered the same as 3/8" PM PICCO .050"

63PM1-50 would this be comparable

 

[GASoline71]

It'll fit a 14" Stihl 3/8" .050 Low profile (PICCO)

Gary

 

[cuttinscott]

Dolmar 92 chain = Oregon 91 chain. 50 driver usually is for stihl cause their different than the rest of the industry........ Normally 52 driver is standard

Scott

 

[Austin1]

That should fit a little mac I find they take the same dl count as Stihl.

 

[cuttinscott]

That should fit a little mac I find they take the same dl count as Stihl.

McC some were 49 driver some were 50 driver they had NO CLUE :hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange: And Don't forget Homie used 53 driver......

Scott

 

[Austin1]

McC some were 49 driver some were 50 driver they had NO CLUE :hmm3grin2orange: :hmm3grin2orange: :hmm3grin2orange: And Don't forget Homie used 53 driver......

Scott

You are right I am thinking of my older saws with the fatter tip.

 

[sdt7618]

cheers

so if these are dolmar branded and boxed chains, what will they fit... electric?

 

[cuttinscott]

so if these are dolmar branded and boxed chains, what will they fit... electric?

Dolmar has NOTHING that they will fit they use 52 driver for all their 14" saws.

Scott

 

[sdt7618]

For someone else?

Dolmar has NOTHING that they will fit they use 52 driver for all their 14" saws.

Scott

Would Dolmar make chains for someone else?

 

[SawTroll]

Would Dolmar make chains for someone else?

Dolmar doesn't make any chains at all, they are all rebranded Oregons (same as with Husky, Jred etc).....

 

[sdt7618]

thanks

thanks troll, still a mystery as to what dolmar they would fit though?

 

[cuttinscott]

thanks troll, still a mystery as to what dolmar they would fit though?

I said before there is NO DOLMAR that a 50 driver chain fits. Is there a dolmar part # on the box??

522 092 046 = 12" .050" low pro 3/8" 12" 100-PS401
522 092 052 = 14" .050" low pro 3/8" 14" 100-PS401
522 092 056 = 16" .050" low pro 3/8" 16" 100-PS401


Scott

 

[Fuzly]

Any numbers or marking on the chain? Might have been placed in the wrong box.

 

[SawTroll]

Any numbers or marking on the chain? Might have been placed in the wrong box.

Well, they may have stocked it, in an attemt to stihl some chain costumers from Stihl, if they popped in looking for replacement chains......

A few years ago Stihl made a huge list of "replacement" chains for other saw brands, even .058 chains, but I have not seen any Stihl chains here, from that list........:bang: :bang:

 

[sdt7618]

chain part no...

right have found the box.

the chain is for a Bullcraft KS-350 part no 649/082.

is this part of the dolmar group.

 

[cuttinscott]

right have found the box.

the chain is for a Bullcraft KS-350 part no 649/082.

is this part of the dolmar group.

Bullcraft KS-350 googles to ALPINA saw company not related to Dolmar to my knowledge.. Probably was custom cut out for that saw by a dealer.

Scott