Whos up for a GTG 25mi North of Louisville KY?

[gink595]

I don't have a saw for that class not sure where it should be.

LOL, Thats why you weren't around to collect the cash. Your name was put down with a time in it, maybe the wife accidently wrote the wrong name

 

[gink595]

What impressed me was you making the cut up and down within 2 inches with the old pioneer...That was fun,,,but so hard to do!!!!

LOL, that old Pioneer runs good and beat alot of newer saws. I couldn't believe it won it's class Wait till I find a race chian for it:greenchainsaw:

 

[stipes]

Lol!!!!

This shot was taken just after Brad sent that cookie flying!

I got that cookie in my garage and gonna frame it...Mike went over and handed it to Kim,,for her to take home...I never seen one go that fast and far before....

 

[blsnelling]

I don't see the 76-85cc class.

 

[blsnelling]

My 56-65cc saw was a 361BB (65cc). Levis 361 was piped. What saw did EricJeepers run?

My only 66-75cc saw was the 372BB (75cc).

My 76-85cc saw, for which the times aren't listed, where a 440/460 (76cc) and a 460 (76cc).

My 86-95cc saw was a 390XPG (88cc).

 

[stipes]

Somemore pics..

 

[outdoorlivin247]

My 56-65cc saw was a 361BB. Ginks 361 was piped. What saw did EricJeepers run?

My only 66-75cc saw was the 372BB.

My 86-95cc saw was a 390XPG.

My 76-85cc saw, for which the times aren't listed, where a 440/460 and a 460.

Eric ran my 359 w/ round ground first then we changed it to square...He ran it 3 time on the square chain and took a full second off of the round...

 

[blsnelling]

Eric ran my 359 w/ round ground first then we changed it to square...He ran it 3 time on the square chain and took a full second off of the round...

I guess I did do something right in that saw. It's beating a 65cc 361 with a 044 carb. Perhaps it's time to go back in and visit that BB cylinder

 

[outdoorlivin247]

I guess I did do something right in that saw. It's beating a 65cc 361 with a 044 carb. Perhaps it's time to go back in and visit that BB cylinder

Heck I am thinking of building a pipe for it...I just have no idea where to start......I don't have a degree wheel or anything...Maybe I could just make up some #'s and see how that works...LOL

 

[super3]

I know i'll miss a few so help me out here guys

front
RMS61Moparman& wife,Breymeyerfam & Korbin, Steve Mount (sitting )

1st row,
Stihlboy,Brads' BIL,blsnelling,ericjeeper,Andyshine77,super3,Booker( Mount ),headleyj,Fish

2nd row,
Scott(ginks buddy),Banshee,Fatguy,Darrel(TRI955),Erick,WILDKNIGHT,Stipes,Supercabs78,Jake(jeppers son),Boda65,OhioGregg,DSM382,outdoorlivin247,gink595

 

[blsnelling]

I know i'll miss a few so help me out here guys

front
RMS61Moparman& wife,Breymeyerfam & Caleb, Steve Mount (sitting )

1st row,
Stihlboy,Brads' BIL,blsnelling,ericjeeper,Andyshine77,super3,Booker( Mount ),?,Fish

2nd row,
Scott(ginks buddy),Banshee,Fatguy,Darrel(TRI955),Erick,WILDKNIGHT,Stipes,Supercabs78,Jake(jeppers son),Boda65,OhioGregg,DSM382,outdoorlivin247,gink595

I think you nailed it! I know I couldn't have done that.

 

[dsm382]

I know i'll miss a few so help me out here guys

dang, not only can you make a pot of beans, you have a better memory then I

 

[outdoorlivin247]

I know i'll miss a few so help me out here guys

front
RMS61Moparman& wife,Breymeyerfam & Caleb, Steve Mount (sitting )

1st row,
Stihlboy,Brads' BIL,blsnelling,ericjeeper,Andyshine77,super3,Booker( Mount ),?,Fish

2nd row,
Scott(ginks buddy),Banshee,Fatguy,Darrel(TRI955),Erick,WILDKNIGHT,Stipes,Supercabs78,Jake(jeppers son),Boda65,OhioGregg,DSM382,outdoorlivin247,gink595

The ? by fish is headleyj and Levi and Crystal son is Korbin...

 

[stipes]

Post the rest of the pics. tomorrow...

Kinda gettin tired....Didnt get about 3 hours sleep before work last night,,but it was worth it..........
I milled with the mini mill yesterday,,and I applogise to some that wanted to see how it worked,,but so much else was goin on...Seems like time just goes by way too fast...
Was happy to see alot of the wives came along...I hope they had as good a time as Kim did..She said for now on,,I'm goin to all the GTG you go too,,and we wanna have one here oneday ...
Thanks again to Erick and Pam ,,and everyone I meet...I had a great time and thank you all........... Jesse..

 

[Erick]

The Infamous "Cookie Incident" Caught on Video

This shot was taken just after Brad sent that cookie flying!

That was scary indeed. That would have been stitches in the emergency room, at a minimum!

Ok you guys, notice how Brad's and my faces are both in shock of what just happened, but Levi's is like "WOO HOO THAT WAS FREAKIN AWESOME!"

I bet that thing flew 75-100'!!

I got that cookie in my garage and gonna frame it...Mike went over and handed it to Kim,,for her to take home...I never seen one go that fast and far before....

For those of you who are sitting there wondering what happened......

<object width="580" height="360"><param name="movie" value="http://www.youtube.com/v/8oxfgV02c2k&hl=en&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/8oxfgV02c2k&hl=en&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="580" height="360"></embed></object>

What you can't see on the video is that cookie doing Mach-2 right past Kim's head who was standing a good 30 or 40ft away.

Man I'm glad that thing didn't hit anybody.

The wife has a ton more vids and pics just gotta get them all loaded up.

 

[blsnelling]

Wow. I wasn't even on the throttle when it threw it!

 

[Erick]

Just wanted to say thanks to everybody who came and made this thing a big success.

I had a lot of fun doing this and it was nice to sit around the fire and get to know everybody and listen to Mike play guitar and sing. If you didn't come or didn't stay you really missed out.


<object width="580" height="360"><param name="movie" value="http://www.youtube.com/v/TDciDUZZBmo&hl=en&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/TDciDUZZBmo&hl=en&fs=1&rel=0&color1=0x3a3a3a&color2=0x999999&border=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="580" height="360"></embed></object>

 

[blsnelling]

Who asked me about a Husky 41 piston?

 

[ericjeeper]

The stephen listed in the 0-45 cc class

Is Stephen Mount.

Plus the times listed in the 46-55 cc class.. a few of those 346 times of mine were actually on Brad Snelling saw.
Yes it was Seans 359 in the 56-65 cc class.

 

[super3]

The ? by fish is headleyj and Levi and Crystal son is Korbin...

Thanks Sean, I fixed it.