Wigglesworth Charity Drive

[tbone75]

Randy, you were about a day and a half late.



Rumor has it that a certain 028 Super is making a brief stop in Tennessee before it goes to California............this may be pure speculation though.........:msp_wink:

Nope it was just a tease :hmm3grin2orange:

 

[Work Saw Collector]

and a 32 inch oregon lightweight bar with a square tooth semi skip chain View attachment 235687

His Pic.

 

[Scooterbum]

His Pic.

Gonna look good on my 064/flattop................

 

[tbone75]

Scoot I think it would look much better on my Myzerized 064 :hmm3grin2orange: Or the 066 if I ever get it together?

 

[blsnelling]

1. MS460, fully rebuilt, ported, 25" bar, two new chains, wide clutch cover, dual big dawgs, roller chain catcher.
2. Woods port by Eric Copsey on your good running pro built saw.
3. 32" Oregon reduced weight bar with a square tooth semi skip chain
4. 28" Sugihara light weight bar
5. I think I'm missing one. Help me out here. Did Randy throw a port job in this one too?

What else am I missing here?

 

[Jon1212]

Nope it was just a tease :hmm3grin2orange:

I have confirmation from a one Mr Randy Evans (Mastermoobs). It seems that he, and Wigglesworth's alter ego Mr Jeremy Barger have been conspiring in a most subversive manner.

I probably wouldn't have found out, but the percocet loosened up ol' Wiggs talkin' box over in another thread.

 

[AZLOGGER]

1. Ms460, fully rebuilt, ported, 25" bar, two new chains, wide clutch cover, dual big dawgs, roller chain catcher.
2. Woods port by eric copsey on your good running pro built saw.
3. 32" oregon reduced weight bar with a square tooth semi skip chain
4. 28" sugihara light weight bar
5. I think i'm missing one. Help me out here. Did randy throw a port job in this one too?

STIHL 28" bar 3/8 .050

 

[blsnelling]

Ok, I've obviously lost track here. Did I turn down the Sugi bar since we already had a bar for the saw? And then AZZlogger threw his in afterwards? This thread it's too long to search all this out.

 

[Jon1212]

Ok, I've obviously lost track here. Did I turn down the Sugi bar since we already had a bar for the saw? And then AZZlogger threw his in afterwards? This thread it's too long to search all this out.

Not sure what was offered when, but there isn't any need to start calling names, Brad..............LOL!!!

 

[showrguy]

What else am I missing here?

yes brad,
randy offered to throw in a woods port job also..

 

[blsnelling]

yes brad,
randy offered to throw in a woods port job also..

Thanks. If someone remembers who offered the Sugi bar, please let me know.

 

[blsnelling]

1. MS460, fully rebuilt, ported, 25" bar, two new chains, wide clutch cover, dual big dawgs, roller chain catcher.
---New 25" Stihl ES bar from Stihl-Pioneer
---Plastic covers from RiverRat via Tree Monkey
---3/4 wrap handle from Arrowhead
---Clutch cover and dual big dawgs from trx250r180
---Roller chain catcher from Jacob J.
---Two new Stihl chains from Young
2. Woods port by ECSaws on your good running pro built saw.
3. Woods port by Mastermind on your good running pro built saw.
4. 32" Oregon reduced weight bar with a square tooth semi skip chain from trx250r180

5. 28" Stihl ES bar from AZLogger

I hope I got all of this right and didn't leave anyone out. I feel like I've been trying to juggle 100 things at one time since this started. I'm bound to drop something!

 

[Stihl-Pioneer]

Brad,
The 25" bar went out priority today. I thought it had been mounted on a saw, but I believe it was actually NIB.

 

[Mastermind]

Don't sweat it Brad. I'm easy to forget. :msp_sneaky:

 

[LowVolt]

What about stumpy's T-shirt?

 

[LowVolt]

i have a almost new 460 set of spikes ,they are still chrome looking ,only cut a couple days with them ,i can come up with an oversize cover also, i have a 28 inch sugihara bar with a square cut chain if want some shiney bling on the saw

Here it is....

 

[Jon1212]

1. MS460, fully rebuilt, ported, 25" bar, two new chains, wide clutch cover, dual big dawgs, roller chain catcher.
---New 25" Stihl ES bar from Stihl-Pioneer
---Plastic covers from RiverRat via Tree Monkey
---3/4 wrap handle from Arrowhead
---Clutch cover and dual big dawgs from trx250r180
---Roller chain catcher from Jacob J.
---Two new Stihl chains from Young
2. Woods port by ECSaws on your good running pro built saw.
3. Woods port by Mastermind on your good running pro built saw.
4. 32" Oregon reduced weight bar with a square tooth semi skip chain from trx250r180

5. 28" Stihl ES bar from AZLogger

I hope I got all of this right and didn't leave anyone out. I feel like I've been trying to juggle 100 things at one time since this started. I'm bound to drop something!

I shall refrain from making reference to dropping large branches..................:taped:

 

[LowVolt]

:good::good::good:A huge thanks to all the prize donors!!!!!!!!!!!!!!!!!!:good::good::good:

 

[Mastermind]

I shall refrain from making reference to dropping large branches..................:taped:

LOL.......When I saw Brad in KY he still had the remnants of a shiner. Looked like he had went a round or two with a heavyweight..............tree.

 

[Jon1212]

LOL.......When I saw Brad in KY he still had the remnants of a shiner. Looked like he had went a round or two with a heavyweight..............tree.

Well Randy, as near as I can tell the positive side is that it sure did kick start Brad's sense of humor..............

And Brad please remember these two things:

1. I'm just funnin' ya'

2. I got both shin bones broken, and four ligaments torn in my ankle by a stupid ******* tree in September. (Hence tbone calling me Peg Leg)........LOL!!!