I'm going to pass on this 2150 then. Too much of a cc disadvantage.
Wildthing Races at GTG's.....
- Thread starter Arrowhead
- Start date
Help Support Arborist Forum:
Yea, Me and my big mouth..
Some how think it wouldn't do us any good any way.:hmm3grin2orange:
Gregg,
Well, my entry will be stratofied. I just bought a purple 4018, lol
Well, my entry will be stratofied. I just bought a purple 4018, lol
From the sound of MoparMike's...You won't be handicaped at all!
Gregg,
I was just looking on the Bailey's site for a decent bar and discovered they have bars up to ~$45!!!! Man, I only give $5 for the saw to begin with.
I'm going to need a B&C myself.
A while back they had a close out on Carlton stuff. I bought two bar & chain combos for like $13 dollars each BC combo, why not see if that closeout is still going on?
http://www.baileysonline.com/search.asp?SKW=CTC 16 .375&catID=11902
http://www.baileysonline.com/search.asp?SKW=CTC 16 .375&catID=11902
Last edited:
ridgerunner97
ArboristSite Operative
I've got a crapsman version sittin down in the shed just found this thread i'm pullin it apart tonight and we'll see what she got. If I can figure out how to take a decent video and post it I will. It sat under my neighbor's RV for 7yrs and the chain was stuck to the bar, runs good stock, we'll see what I can get out of it. This is so insane but i'm lovin it!
Mastermind
Work Saw Specialist
You guys know what????????????
Ya'll ain't right.
Ya'll ain't right.
rms61moparman
Addicted to ArboristSite
You guys know what????????????
Ya'll ain't right.
Now THERE'S a news flash!!!
Reckon what gave you the first clue???
Mike
Mastermind
Work Saw Specialist
Now THERE'S a news flash!!!
Reckon what gave you the first clue???
Mike
The first clue was when ya'll let me hang out here.
You guys know what????????????
Ya'll ain't right.
I appreciate that comment, that's the nicest thing that's been said to me today. Gonna be a three scotch night tonight.
wigglesworth
Booned
Since this seems to be the thread for little plastic poulans, I figured id ask here. Anybody have a oiler for a 2150? I also need a clutch drum as well...It appears that the previous owner decided to let her rip without oil for quite some time. Cut the drum nearly in half and broke part of the teeth off. I bet the guy was wondering why his bar was melting
rms61moparman
Addicted to ArboristSite
Let me see what that part # is and I'll get back to you.
I have a few parts saws but no 2150.
They may have used the same oiler in a bunch of different saws though.
Mike
I have a few parts saws but no 2150.
They may have used the same oiler in a bunch of different saws though.
Mike
rms61moparman
Addicted to ArboristSite
Just like I figured,
It looks like they used the same oiler on everything.
I'll get you one in the mail in the next day or two.
Mike
It looks like they used the same oiler on everything.
I'll get you one in the mail in the next day or two.
Mike
wigglesworth
Booned
rms61moparman
Addicted to ArboristSite
I thought I had a clutch drum for you too but this one is in the same shape as yours!
Is this the part you need???
Mike
Is this the part you need???
Mike
wigglesworth
Booned
I thought I had a clutch drum for you too but this one is in the same shape as yours!
Is this the part you need???
Mike
Looks to be the one...
ridgerunner97
ArboristSite Operative
Well tore into the craftsman last night and tonight and got it back together. She didn't last long, I don't know what happened, it was runnin ridiculously strong for its size. I muff modded it, and took a dremel to the intake and exhaust ports. Tried tunin the carb in and it was close, made a bunch of test cuts then it started to race really really bad, popped and shut off. I'm pretty sure the plastic thingy between the carb and the cyl. either melted or broke apart and is allowing a major air leak. I'm gonna tear it back down tomorrow night and see what I got.
Just for reference any of you guys tach your modded wildthingies? What are you turning free? Mine was over 13k and I got out of it but it was still pullin decent, so idk exactly what it will spin but i'm sure it will spin and lean out enough that it will melt the crank bearings.
Just for reference any of you guys tach your modded wildthingies? What are you turning free? Mine was over 13k and I got out of it but it was still pullin decent, so idk exactly what it will spin but i'm sure it will spin and lean out enough that it will melt the crank bearings.
