WKY GTG Fall 2012

[Mastermind]

This saw porting business sure is cutting into my fun time. I'll have an MS361, and with any luck a 181 Husky. I doubt they will be very competitive in a race like this though.

 

[deerjackie]

This saw porting business sure is cutting into my fun time. I'll have an MS361, and with any luck a 181 Husky. I doubt they will be very competitive in a race like this though.

I say hes sandbagging,bet he has wing nuts on the cylinder head bolts he has had them on and off so much:hmm3grin2orange::hmm3grin2orange:

 

[tree monkey]

U bum.



For word from a sponsor, there will be pay out for 1st,2nd and 3rd place for the 3/4/5/6 and a 1st place for the unlimited class races!!!

Again, all but the unlimited class must run on pump gas, my pump gas specificly, but any chain can be ran. Most likely 8x8 for the 3 cube, 10x10 for the others.

I wanna keep things fair. No cheater saws and junk will be tolerated. Any saw entered can be inspected should someone contest. I really don't think it'll be a problem, but wanna get that outta da way first thing. Gotta keep things fair.

Anyhoo, I'm hoping a have a saw or two ready to go. Shop time is pretty thin at the moment.

rules? what are the rules?

 

[Mastermind]

rules? what are the rules?

I think as long as they will run on pump gas anything goes. :msp_w00t:

 

[user 64030]

Now if somone would just figure out how to turn a wrap bar into a pressure tak and pump a little laughing gas into the jug . we could see some real neat fireworks.


dw

 

[deerjackie]

Now if somone would just figure out how to turn a wrap bar into a pressure tak and pump a little laughing gas into the jug . we could see some real neat fireworks. It only takes a little,like 2 co2 cartridges full after the saw gets wound up in the wood to boost the rooster, applied at a safe rate so the saw still has a one piece head when finished.:hmm3grin2orange::hmm3grin2orange:

 

[mdavlee]

Well I won't be making this one. I'll be traveling that weekend to an outage.

 

[user 64030]

...applied at a safe rate so the saw still has a one piece head when finished.

writting from experience there are we?

:msp_wink:

dw

 

[deerjackie]

N2O Cartridge for Cream Whippers / Dispensers 24/Box

 

[user 64030]

Cool, They are even blue-ish like the NOS tanks

I should get one just to mock up on my ms261 just for chits-&-giggles

dw

 

[deerjackie]

Mine wont run on the whip cream, makes carb all sticky and draws yellow jackets and flies.:msp_biggrin:

 

[user 64030]

Now to figure out how many turns out on the H screw to compensate for the N[SUB]2[/SUB]O

dw

 

[barneyrb]

Now to figure out how many turns out on the H screw to compensate for the N[SUB]2[/SUB]O

dw

That might be an expensive learning curve......it was for me and a 383.......

 

[user 64030]

That might be an expensive learning curve......it was for me and a 383.......

Well I ain't about to do it fer really real.... It would be neat to mount the cyclinder on the wrap bar, over by the clutch cover, get a a little NOS sticker, and a smallish hose coming out going to the airfilter box....


Then just wait for people to notice.


Thought about doing the same w. a NOS Energy drink bottle on my ATV just for giggles.

dw

 

[wigglesworth]

rules? what are the rules?

I think as long as they will run on pump gas anything goes. :msp_w00t:

Sorry Tree. Yes, anything goes, any chain, yada yada, but has to run on 87 octane, non-ethonal at 40:1 mix. I will supply the fuel.

Most likely, 3ci will be 8x8 and the rest 10x10. The cants will be poplar and pine. There will be LOTS of other wood there, so folks don't have to enter the race just to come. Will be fun for all.

 

[MotorSeven]

..........please tell your wives that I am normal. It takes a little while for some to realize we are not all crazy chainsaw people

I just read the whole thread and I don't understand why Mrs. J would think "we" are Abby Normal?????

[video=youtube_share;yH97lImrr0Q]http://youtu.be/yH97lImrr0Q[/video]


I don't know if I can make it, just finishing up my log house and we are starting to move in. It's been a long road and I need a break so I will try and head west at the end of the month.

 

[milkman]

Just 20 more days, I'm counting...Still time to help out and get in on the drawing...

 

[deerjackie]

Just 20 more days, I'm counting...Still time to help out and get in on the drawing...

Between working 228 hrs a month bow hunting and youth season opens on the 27th i need a ton of 5 hr energy in the 24 hr bottles, but,cant wait and maybe have a good deer pic to show off from granddaughters hunt,and bacon,bologna and bbq!!!!! yee haa:msp_biggrin:Oh yea,and chainsaws and great people!!!!!

 

[user 64030]

Well under the 2-week window, figured i'd bump this thing a bit.

BTW did this happen??? If so my spam filters must have ate it.

I will be sending an email out with specifics about the event. I will include the address along with some competition info. May even be some giveaways. I have someone willing to sponsor some things. So make sure I have your email ASAP. Thanks!!

Look forward to meeting a face or three from here...

dw

 

[Roll Tide]

Well under the 2-week window, figured i'd bump this thing a bit.

BTW did this happen??? If so my spam filters must have ate it.



Look forward to meeting a face or three from here...

dw

Im also looking forward to putting some faces to these names. I cant believe that we are within two weeks