woods port saw video thread

[X 66 Stang347 X]

That's my other way also. I can check on exact price. I think 120-140

 

[jmssaws]

That's my other way also. I can check on exact price. I think 120-140

I was just curious,no need to ceck.

 

[X 66 Stang347 X]

Close to 200. Ouch

 

[SquareFile]

Is that a woods port.

No, its a gas race saw.

Here's a 346 of mine that gets acussed of being a cant saw by internet wonders. Its not. Don't piss rev like a mofo but easily out cuts a mofo with little effort. Andrew and Jason are good people. Good job Andrew!

 

[Paragon Builder]

No, its a gas race saw.

Here's a 346 of mine that gets acussed of being a cant saw by internet wonders. Its not. Don't piss rev like a mofo but easily out cuts a mofo with little effort. Andrew and Jason are good people. Good job Andrew!

I've got a hunch that if you put one of your amazing chains on a mofo, it wouldn't be half bad. Of course everyone knows the 346 is a much better platform for a race saw than an 026/260...


Sent from my iPhone using Tapatalk

 

[drf255]

I'd put you on ignore Squarefile/Shawn, but I find your mental pathology fascinating. Maybe your mother never loved you, or maybe you ate too many paint chips as a child. I'm getting a handle on it as you continue to self deprecate. I postulate it's Napoleonic in origin.

You are number one in one thing for sure, making enemies online.

Dan, thanks for pointing that out, but it's not really important to me that my saws are the fastest. I'm more about balance in a saw. Plus, if I hit the ground or a rock while cutting, only 10 minutes of work is down the drain, not many hours. Ever see me race at one of our GTG's Dan? You haven't, cause it's not my thing.

My saws have rounder ports that aren't taken to the limit. I wanna build the saw you grab first when you need one, not necessarily the fastest.

Not sure SF ports his own saws, but that don't matter. They do run well. And as I stated many times, a 346 is a tough platform to beat. It's just faster by design. I'd rather have an 026 in the woods with me though, anyday.

 

[Trx250r180]

The 346 seems to be a fast saw ,but has anyone figured out how to make them ride in the pickup bed without rolling over on the rh side of the saw yet ?

 

[svk]

The 346 seems to be a fast saw ,but has anyone figured out how to make them ride in the pickup bed without rolling over on the rh side of the saw yet ?

Someone fabbed a kickstand off the chain catcher. It's in the archives here somewhere.

 

[X 66 Stang347 X]

 

[Mike Gott]

The 346 seems to be a fast saw ,but has anyone figured out how to make them ride in the pickup bed without rolling over on the rh side of the saw yet ?

Yup, I put a roller guide/kick stand on mine, works great


Sent from my iPhone using Tapatalk

 

[Trx250r180]

My husky 14 inch concrete/ disaster saw does the same thing ,i think the sideways balance is off on the brand in general ,the wrap saws like 372 xpw seem to ride ok though .

 

[Trx250r180]

No, its a gas race saw.

Here's a 346 of mine that gets acussed of being a cant saw by internet wonders. Its not. Don't piss rev like a mofo but easily out cuts a mofo with little effort. Andrew and Jason are good people. Good job Andrew!

That little saw sounds pretty happy .

 

[jmssaws]

My husky 14 inch concrete/ disaster saw does the same thing ,i think the sideways balance is off on the brand in general ,the wrap saws like 372 xpw seem to ride ok though .

A 372 without the outside dog won't sit on flat ground.

 

[JT78]

I thought you was about to shoot it. Lol
You need a little cherry coke with that

Little .40cal

I've heard that the Kahr's jam never knew anybody who had one is it true? sorry it's a little off topic

 

[X 66 Stang347 X]

I've shot maybe 1200 rounds through it without a jam so I trust this one. Several things can cause a jam with the small guns. One is it's more acceptable to limp wristing. There was something with the slide lock on some models that needed to be watched. I polish all my feed ramps on all my autos. It helped on a lcp that had trouble cycling critical defense. Winchester ranger T's is normally what I have.

 

[MGoBlue]

No, its a gas race saw.

Here's a 346 of mine that gets acussed of being a cant saw by internet wonders. Its not. Don't piss rev like a mofo but easily out cuts a mofo with little effort. Andrew and Jason are good people. Good job Andrew!

That saw is a freak. I finally peaked under the hood and it is in fact not 2 piece. Hard to believe really.
I often wonder what the hang up is on highest RPM out of the wood. If I can out cut a saw (same cc & b/c)that turns 17k out of the wood with a saw that turns 14k, what did you win?
And for the record, I'll never post saw video's of rotten, falling apart wood. This is the same log as my cant.
These are work saws. Square chain cuttin' square cookies



EC346 is just a kunt hair behind my DD357, same b/c.

 

[blsnelling]

That would be mine. I crafted it from a 357 dawg, IIRC.

 

[X 66 Stang347 X]

That would be mine. I crafted it from a 357 dawg, IIRC.

Looks good. Found it on google images

 

[blsnelling]

 

[Mike Gott]

I like yours better Brad, the stock dogs on the 346 are too small really. Putting the 357 ones looks like a good set up


Sent from my iPhone using Tapatalk