NEW CAD SCORES! Lots of PICS!!!

nstueve · Oct 4, 2012

So I went to my honey hole just to find a bar for a Dolmar 540 and a few more followed me home...

First this dolly came from the same honey hole but didn't have a bar so I went back and found a NOS Windsor speed tip. I traded some parts for it so I'm even up at this point...

Found a Husky 181se hiding in the corner not getting any love... good for a few parts so I threw $30 to him for the saw. Got hit by a tree but has a perfect P&C!

More to come!

nstueve · Oct 4, 2012

Next I found a pile of 024/026's calling my name. found this one with glossy P&C ready to run... Don't know what all it needs yet but tank vent and air filter cover are the only pieces MIA! bar is strait and good sprocket tip. paint a little worn but good to run! Non-pro, no decomp, no adjustable oiler, and a fixed H-jet carb and non-pro air filter... BUT I have a wt194, carb cover and pro air filter for it already. Just need a tank vavle for it!!! Probably running by tomorrow!

Saved the best for last!!!!

nstueve · Oct 4, 2012

For all you Poulan PRO fans out there...

Yeah that's right! Poulan Pro 655! 36in .063, 404 b&c...

missing some pieces but the guy told me I could come back and find them later since they are around somewhere... Hope they didn't get thrown out anyhow!

Worst part of the whole night... found some exhaust side scoring on piston... :sad: Hope I can save the cylinder!!!

nstueve · Oct 4, 2012

almost forgot... he threw this in as a freebie for me to "figure out."

00 steve · Oct 4, 2012

Congrats. Looks like you got the hook-up.

srcarr52 · Oct 4, 2012

Let me be the first to say... YOU SUCK!

leeha · Oct 4, 2012

Nice score, To bad the 655 piston is toast.
I'm sure you can find one in time.
You'll be busy for awhile with all those saws.

Lee

Arrowhead · Oct 4, 2012

Congrats. Great score.
You know where to send the 655 if you don't feel like messin with it.

Lurch2 · Oct 4, 2012

I'm sure someone would be willing to lighten your load this weekend.:msp_mad:

A.E. Metal Werx · Oct 4, 2012

I've got a sore OE piston and rings ill bring along with me. Not new but till in great shape.

nstueve · Oct 5, 2012

Arrowhead said:
Congrats. Great score.
You know where to send the 655 if you don't feel like messin with it.

you might see the cylinder come ur way soon... LOL... I just hope I can find the intake assembly for it. I'd like to run it before I forced to choose between my 9010 and it...:eek2:

Chris J. · Oct 5, 2012

Nice haul

, this thread deserves a bump from page two.

BTW, Nathan, I second the motion that you suck!

Is there a reason that you're not revealing the location of this "honey hole?" :laugh:

srcarr52 · Oct 5, 2012

I hope he remembers that as I was coaching him through the pile via the phone he didn't even know what a 655 was and I said BUY THAT ONE FOR ME!

Nathan, are you going to cough that up or am I going to have to paddle you with a chainsaw bar? :msp_mad:

67L36Driver · Oct 5, 2012

There are a couple listings on evilbay for 655 pistons. One seller has over forty of them.

nstueve · Oct 5, 2012

srcarr52 said:
I hope he remembers that as I was coaching him through the pile via the phone he didn't even know what a 655 was and I said BUY THAT ONE FOR ME!

Nathan, are you going to cough that up or am I going to have to paddle you with a chainsaw bar? :msp_mad:

Gotta catch me first! :sword:
Somebuddy shouldn't be complaining since they get to leave with the 181se and since they already have a 655... Cough cough clear throat... Besides can you really blame a guy for looking up his new cad score, learning, and then wanting to keep it? Sounds like I need to lock my shiz down tite tonight!

67L36Driver said:
There are a couple listings on evilbay for 655 pistons. One seller has over forty of them.

Are those all OEM? or are they aftermarket?

Arrowhead · Oct 5, 2012

nstueve said:
you might see the cylinder come ur way soon... LOL... I just hope I can find the intake assembly for it. I'd like to run it before I forced to choose between my 9010 and it...:eek2:

Send it over. I have whatever you need to get the 655 flinging chips again.

Arrowhead · Oct 5, 2012

nstueve said:
Are those all OEM? or are they aftermarket?

Bryce has the oem BP piston kits. Yours looks like a non-BP, however the bp piston will work fine.
You won't find a better deal on a new piston kit.

Arrowhead · Oct 5, 2012

srcarr52 said:
I hope he remembers that as I was coaching him through the pile via the phone he didn't even know what a 655 was and I said BUY THAT ONE FOR ME!

Nathan, are you going to cough that up or am I going to have to paddle you with a chainsaw bar? :msp_mad:

I remember when he first mentioned this large pile, I called dibs on P62's and 655's. Now he's stickin it in our azz's. No good sob..... :laugh:

Just messin with ya Nate, everybody needs to experience a 655. :rock:

huskydude · Oct 5, 2012

good scores man, I like threads like this, at least when they aren't local

nstueve · Oct 5, 2012

Arrowhead said:
I remember when he first mentioned this large pile, I called dibs on P62's and 655's. Now he's stickin it in our azz's. No good sob.....
Just messin with ya Nate, everybody needs to experience a 655.

honestly I need to start down sizing in the near future... I will probably try to unload all that I can this fall and next spring. I expect my wife will have a job soon and we'll be movin'! Probably get down to 6-7 saws I need/want to keep. Some of these saws will probably hit the market next year some time...

Speaking of which he has a Partner 7000 and 500 both have lightly scored pistons if anyone wants them I can pick them up at a later date...

PS: anyone that wants to be a hater might find themselves black listed from future honey hole treasures! :taped:

Shaun and Ed get first dibs on the 655 when I release it... Ed did call the 62's and 655's but Shaun did coach me... hmmm... ro-sham-bo in order to figure out who gets it later??? LOL

NEW CAD SCORES! Lots of PICS!!!

Help Support Arborist Forum:

Makita Freak!

Makita Freak!

Makita Freak!

Makita Freak!

ArboristSite Operative

We can't stop here, this is bat country.

Addicted to ArboristSite

RARE BREED

ArboristSite Operative

Addicted to ArboristSite

Makita Freak!

Addicted to ArboristSite

We can't stop here, this is bat country.

Tree Freak

Makita Freak!

RARE BREED

RARE BREED

RARE BREED

ArboristSite Guru

Makita Freak!

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!