help with husqy 350 tear down

oaktree · Jun 5, 2013

Any help with a link to video tear down of husqy 350 . Mainly carb and boot removal . Saw of 5 or 6 years and many cords of wood started to run lean , it would not adjust richer . I'm looking into the boot first , then I'll check lines,and fuel filter . Any Ideas what else it could be . Where is and how to check tank vent if that could be it .

thanks already rt

moody · Jun 5, 2013

http://www.arboristsite.com/chainsaw/237587.htm

This thread is a good place to read. You can't richen the tune you've got an air leak. Most likely a plastic boot clamp failure. This will have lots of answers for you there.

nmurph · Jun 5, 2013

Remove the top cover.
Remove the filter.
Remove fuel and vent line.
Remove the two carb bolts from rear.
Remove carb from isolation mounts.
Lift carb out.
Remove the muffler and bracket.
Remove the four cylinder bolts.
Pull the cylinder off piston (but not before checking squish).
Remove intake.

Reverse for reassembly (and delete base gasket if possible, using liquid gasket for sealant).

mweba · Jun 5, 2013

Not exactly what you are looking for but this is how I do them. Will no longer send one out without the riser resealed.

[video=youtube_share;gap4qZC6fKg]http://youtu.be/gap4qZC6fKg[/video]

oaktree · Jun 5, 2013

re

thanks everyone ! good info rt

help with husqy 350 tear down

Help Support Arborist Forum:

oaktree

ArboristSite Operative

moody

Guest

nmurph

ArboristSite.com Sponsor

mweba

Addicted to ArboristSite

oaktree

ArboristSite Operative

Similar threads

Latest posts

help with husqy 350 tear down

Help Support Arborist Forum:

oaktree

ArboristSite Operative

moody

Guest

nmurph

ArboristSite.com Sponsor

mweba

Addicted to ArboristSite

oaktree

ArboristSite Operative

Similar threads

Latest posts

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!