I'm done with MS361

[Trigger-Time]

With add on's that is

Put my old Fish Gill Muffler that I had on my first 361.
Also a Elasto Start on today, it really don't need the Elasto Start.
But I like them alot, Part number 0000 190 3414.
The 3/4 wrap adds 7oz
Full of mix, oil, 3/4 wrap. duel spikes, roller chain catcher and
18" ES bar .063-- .375 chain it scales out at 17lbs 12oz

TT

 

[FXDL]

Very nice! so the roller between the dogs replaces the old chain catcher? i just put the big dogs on my 460 when i bought it. but i reinstalled the old chain catcher and have the roller

 

[jeepyfz450]

looks great. i ran a 3/4 handle on my 046 for a while but never really used it so i pulled it off the other day.

 

[Tzed250]

.

I love the elastostart. Even my FS76 has one.


.

 

[Trigger-Time]

Very nice! so the roller between the dogs replaces the old chain catcher? i just put the big dogs on my 460 when i bought it. but i reinstalled the old chain catcher and have the roller

I always take the old catcher off, but put the screw back in.
I take it off so less junk gets caught on it as when cutting with the grain.


TT

 

[sjp]

Looks great--will that 3/4 wrap work on 362 if so could you post part number

 

[Trigger-Time]

looks great. i ran a 3/4 handle on my 046 for a while but never really used it so i pulled it off the other day.

Not sure that I am sold on the 3/4 myself.
I had it on for a short time but am going to give it another chance
before I decide to sell the 3/4.


TT

 

[Trigger-Time]

Looks great--will that 3/4 wrap work on 362 if so could you post part number

Am almost sure it won't fit 362.

I don't have the part number it came in a kit.
Along with full clutch cover (it's on MS440) chain catcher.
From what I remember the kit was cheaper than just
the 3/4 wrap.


TT

 

[madhatte]

I ran that same setup at work forever and loved it. Now I carry the 260/460 pair and find it more flexible, but still miss the old 361 from time to time.

EDIT: oh, look -- here I am dropping a burning snag with it.

 

[Anthony_Va.]

I have the 3/4 and double dawgs with the roller catcher on mine also. besides looking cool, it's mostly just in the way except for the few times I actually use it. Wont fit in a case, harder to get to the bar nuts, cant lay it on it's side to fuel it. It can be a pain. But man, does it look cool.

 

[porsche965]

Some very nice MS361 pics. Thanks allot!

:biggrinbounce2:

 

[Trigger-Time]

Mine has seen little use and would have stayed that way for some time to come.
But I let dad use my 036, now he thinks I give it to him and I don't have
the heart to tell him any difference. I put it together out of parts, it
is kinda rough on the outside but runs good. Main thing I didn't
worry about beating the 036 around a little. Oh well he's tickled with
it and that worth something.



TT

 

[SawTroll]

With add on's that is

Put my old Fish Gill Muffler that I had on my first 361.
Also a Elasto Start on today, it really don't need the Elasto Start.
But I like them alot, Part number 0000 190 3414.
The 3/4 wrap adds 7oz
Full of mix, oil, 3/4 wrap. duel spikes, roller chain catcher and
18" ES bar .063-- .375 chain it scales out at 17lbs 12oz
....
TT

Cool! :biggrinbounce2:

I will probably remove the elasto-start from mine, but I am not saying that anyone else should.

The mesh type air filter is more than good enough here.

By now, you just need to get rid of that 3/4 wrap handlebar.......

 

[little possum]

Looks great--will that 3/4 wrap work on 362 if so could you post part number

1135 790 3600 for 361

1140 790 3700 for the 362

 

[CentaurG2]

Almost done with mine as well. Goodbye miss daisy, hello Husky 562xp. It will be just like selling a Jaguar.