Sold Velocity Stacks

[SquareFile]

CNC aluminum velocity stacks $25 each shipped to lower 48. I will ship elsewhere for addition cost.

2.125" clamp diameter for Husqvarna 2100/2101 and other model that have the same center to center bolt circle diameter( 1.375"). I will supply 5mm nylocks. Qty 10

2" and 1.875" clamp diameter for Stihl with 1.22" center to center bolt circle. Qty 2 each

With Stihl V-stacks I will supply 1/16" thick gasket material so you don't have to modify backing plate/throttle rod support. You will have to cut yourself.

Uni Filters can be purchased for less than $20 and K&N for $40 and up.

 

[redfin]

Do you mill these? They look good.

 

[SquareFile]

Do you mill these? They look good.

Lathe with live tooling. 1 operation

 

[gulity1]

I'll take 1 for 2100

 

[DexterDay]

Waiting on my filter to arrive.

Thanks SquareFile! !

 

[redoakneck]

Waiting on my filter to arrive.

Thanks SquareFile! !

View attachment 403145

Which filter did u go with???

Tia

 

[Toad22t]

Were did you get that wrap handle! Beautiful looking saw there boys.

 

[SquareFile]

2" Stihls are sold. Except for the one I'm keeping.

 

[Toad22t]

Will there be more for stihl's ?

 

[SquareFile]

Will there be more for stihl's ?

There is still 1.875 clamping diameter stacks. I made them purposely for 290/310/390 cause the carb sits low, but will work with others. K&N has a filter with a 40 Deg bend in that diameter. There is many other filter options

 

[Toad22t]

It would be for a 044 or 066

 

[SquareFile]

They'll work. O.D. is 1.875".

K&N has a lot of options. 064 and 044 are the saws posted above

 

[DexterDay]

Which filter did u go with???

Tia

K & N (forget the exact model #, but it was something like 3.5" O.D and 2" O.D at end and 51 mm opening w/metal top. They ain't cheap..

Were did you get that wrap handle! Beautiful looking saw there boys.

Madsens 3/4 wrap. I wish I could find another for my 461.. Good luck in your search.

 

[roger collins]

K & N (forget the exact model #, but it was something like 3.5" O.D and 2" O.D at end and 51 mm opening w/metal top. They ain't cheap..



Madsens 3/4 wrap. I wish I could sind another for my 461.. Good luck in your search.

i bought two of these for my husky 2100's and they work great-very high quality!

 

[Lignator]

excuse my ignorance but what's the benefit of running a velocity stack? does it allow for better filtration due to having more options? any power benefits?

 

[RedneckChainsawRepair]

I ran a VS's but didnt know we needed filters for them.

Very nice SF.

 

[redoakneck]

http://www.knfilters.com/search/product.aspx?prod=RC-2580

Anyone know if this will fit for the stihl stack on a 361 or 044, 0r 660????

 

[mdavlee]

Use this chart. 2" is what you need. http://www.knfilters.com/search/univround.aspx

 

[mdavlee]

http://www.knfilters.com/search/product.aspx?prod=RC-2580

Anyone know if this will fit for the stihl stack on a 361 or 044, 0r 660????

It will fit though.

 

[Toad22t]

What saw is this? I like the two piece cylinder.