Want to Buy ISO lightweight bars TSUMURA

[661Joe]

Looking for
2 24 3/8 050 stihl mount 440
1 14in 3/8 050 for a 200t not sure if these are even made
Lightly used or new

TSUMURA Preferably​

Thanks Joe

 

[chipper1]

Getting old, need those .

 

[Lightning Performance]

Looking for
2 24 3/8 050 stihl mount 440
1 14in 3/8 050 for a 200t not sure if these are even made
Lightly used or new

TSUMURA Preferably​

Thanks Joe

I have 200T bars in 14" OE lp 3/8.
Pile of used ones here nothing new.

 

[661Joe]

Getting old, need those .

Na just worn the one I had down to nothin

 

[661Joe]

I have 200T bars in 14" OE lp 3/8.
Pile of used ones here nothing new.

I don’t care for the lp chains unfortunately

 

[chipper1]

I don’t care for the lp chains unfortunately

What do you run then.
3/8 picco is stihl nomenclature for 3/8 lp or low profile.

 

[661Joe]

What do you run then.
3/8 picco is stihl nomenclature for 3/8 lp or low profile.

Now you have me wondering lol one moment please I know I don’t run the tiny ****

 

[661Joe]

3/8 p 050 14” non safety

 

[661Joe]

I have 200T bars in 14" OE lp 3/8.
Pile of used ones here nothing new.

Got pics of a few ? How much you want?

 

[chipper1]

3/8 p 050 14” non safety

Lol.
Picco, lp, low pro, all the same.
I like the stihl myself, good stuff.
Just finished sharpening a couple of them.

 

[661Joe]

Lol.
Picco, lp, low pro, all the same.
I like the stihl myself, good stuff.
Just finished sharpening a couple of them.

Yeah i hate them stupid double raker chains

 

[661Joe]

after chains as well if someone has a deal on some

 

[thompsoncustom]

Yeah i hate them stupid double raker chains

Than buy a better chain. Stihl sells full chisel chain with a single raker setup. 63ps
Your going to save the most weight running a picco bar and it's gonna cut faster too.

 

[661Joe]

Than buy a better chain. Stihl sells full chisel chain with a single raker setup. 63ps
Your going to save the most weight running a picco bar and it's gonna cut faster too.

O I do lol I don’t run the double raker chains.

 

[thompsoncustom]

O I do lol I don’t run the double raker chains.

ok I don't know the weight of the 14in inch but stihl light weight picco for that saw is under 1 lb.

Stihl 16" E Light 3/8 Picco .050 Stihl 192/200/201 mount 14.6 oz

 

[661Joe]

ok I don't know the weight of the 14in inch but stihl light weight picco for that saw is under 1 lb.

Stihl 16" E Light 3/8 Picco .050 Stihl 192/200/201 mount 14.6 oz

Yeah I just have been running the standard stihl 14 in I wouldn’t maybe even mind jumping into a lightweight bar and going to a 16 even if it was the same weight but two inches longer.

 

[thompsoncustom]

From the Stihl Website:
To reduce weight, it is completely hollowed out after being welded and is filled with fiber-reinforced polymide, making this bar up to 38% lighter as compared to the STIHL ROLLOMATIC® E

 

[Sloughfoot]

Looking for
2 24 3/8 050 stihl mount 440
1 14in 3/8 050 for a 200t not sure if these are even made
Lightly used or new

TSUMURA Preferably​

Thanks Joe

This?

https://arbsession.com/tsumura-light-weight-fk4-3-8-pitch-050-gauge-guide-bar.html

 

[Lightning Performance]

Lol.
Picco, lp, low pro, all the same.
I like the stihl myself, good stuff.
Just finished sharpening a couple of them.

I have Husky semi chisel on a stock 200T for trimming and dirty cleanups from fallen ash.

 

[Lightning Performance]

Got pics of a few ? How much you want?

PM sent