New Ford saw running

Modifiedmark · Jan 28, 2010

Here is my new Ford, both of them actually. :cheers:

Well the one is old but its fairly new to me and it is a runner again as of today.

Quite a interesting little saw to work on, its put together quite differently.

I had to make a new grommet where the fuel line goes into the tank and rig a new tank vent but other then a line and carb kit it was pretty much good to go. The little son of a gun even has a decomp on it and a oil pump that pumps everytime you depress the throttle.

Anyone know anything about these? I know its a Orline made saw, but what is the Orline model name as well as the Ford model name?

It also has a weird air filter setup if this is original .

Give me any info you can on it.

Modifiedmark · Jan 28, 2010

Here is the air filter setup.

Rich Audiano · Jan 28, 2010

My wife would lose her mind if I could get her one for a paperweight and p.i.t.a remover at her office for Ford. Seen a lot of neat Ford stuff,but never a saw. Top notch.... :clap:

Scooterbum · Jan 28, 2010

That is the Ford-Eagle I believe and crosses to the Orline Mark I & Mark II.

Modifiedmark · Jan 28, 2010

Thanks, I thought that it might be that. Not much info out on these is there?

Kinda surprising to see a decomp and .325 pitch chain on a 2 ci saw.

igpoe · Jan 28, 2010

Rich Audiano said:
My wife would lose her mind if I could get her one for a paperweight and p.i.t.a remover at her office for Ford. Seen a lot of neat Ford stuff,but never a saw. Top notch....

http://cgi.ebay.com/Vintage-Ford-Ga...emQQptZLH_DefaultDomain_0?hash=item2eaab46456
Ask and it will be given you,seek and yee shall find.............click on above link and put $153.19 bid on it.

Igpoe :cheers:

Scooterbum · Jan 28, 2010

igpoe said:
http://cgi.ebay.com/Vintage-Ford-Ga...emQQptZLH_DefaultDomain_0?hash=item2eaab46456
Ask and it will be given you,seek and yee shall find.............click on above link and put $153.19 bid on it.

Igpoe

I've always wanted one to match my tractors but not at that price.That one looks very well used.

Mark yours look great !!

joe25DA · Jan 28, 2010

That is a real nice saw. appears to be well built, even a bolt on jug. Any idea on the year?

Scooterbum · Jan 28, 2010

Early 70's, Puts me in mind more of a Remington.

WoodChuck'r · Jan 28, 2010

First time I've ever seen anything like that.

Strange....

I like it!

joe25DA · Jan 28, 2010

Scooterbum said:
Early 70's, Puts me in mind more of a Remington.

Yeah I thought of remington too. Only cause my Dad's Mighty Mite has a throttle that pumps oil, along with a manual oiler. doesnt have the .325" chain though!

ale · Jan 28, 2010

nice little saw....
I really like the Super Duty also...love the XL decor package on those trucks...Here's my old one...

sorry to hijack...rep on it's way...now back to saws... :cheers:

Modifiedmark · Jan 28, 2010

joe25DA said:
That is a real nice saw. appears to be well built, even a bolt on jug. Any idea on the year?

Joe, I think word has it that Orline made engines for remote control airplanes, and the engine on this looks that way, the way it just bolts into the case.

Urbicide · Jan 28, 2010

Modifiedmark said:
Thanks, I thought that it might be that. Not much info out on these is there?

Kinda surprising to see a decomp and .325 pitch chain on a 2 ci saw.

I believe I remember reading here a while back that Ford-branded saws were part of a sales promotion through Ford Ag dealers. Buy a new tractor and you got a new saw. Didn't ComputerUser (Brandon) have one? That blue color sure does stand out.

Anyone know of a good parts source for O&R saws?

Tzed250 · Jan 28, 2010

OhioGregg · Jan 28, 2010

Nice find Mark, The saw ain't bad lookin either. :clap:

I'm an old Ford nut, and I never saw one of those. Amazzing, because my uncle used to have all kinds of equipment that carried the Ford name. Everything from lawnmower, air compressor, power washer, you name it. But didn't know the saws existed. Makes sence though.

:cheers:

Gregg,

Hddnis · Jan 28, 2010

MM, that is a nice find, really neat saw. I can see what you mean about the plane engine, sure looks like that.

Mr. HE

olyman · Jan 28, 2010

Tzed250 said:

you suck--bragging--or complaining?????:hmm3grin2orange::hmm3grin2orange::hmm3grin2orange::hmm3grin2orange:

Modifiedmark · Jan 28, 2010

Urbicide said:
I believe I remember reading here a while back that Ford-branded saws were part of a sales promotion through Ford Ag dealers. Buy a new tractor and you got a new saw. Didn't ComputerUser (Brandon) have one? That blue color sure does stand out.

Anyone know of a good parts source for O&R saws?

Yeah Brandon USED to have one, but now I have one. I think he took a look at repairing it and decided not to.

It was a little bit of a challange. You would have laughed if you would have seen me with a too big rubber grommet chucked up in my drill press turning it down with a 4.5" grinder with a tiger disk in it, then cutting the groove in it with a air powered 3" cut off wheel.

I had to pull the insert out of the tank vent with a metal screw and found that a Homelite duckbill valve fit perfectly inside it.

The carb will also not come out of the saw without unbolting the motor from the case or double nutting the carb studs and removing them first.

And let me also ask, dose anyone know of a good parts source for O&R saws?

Modifiedmark · Jan 28, 2010

Tzed250 said:

Very nice indeed, but I couldnt haul much firewood in that thing, and it would look funny with a 5th wheel hitch mounted to the roof.

And Ale, that XL is not that easy to find especially a long bed and I prefer my trucks without carpet!

Them yuppies can keep there carpet and shortbeds.

New Ford saw running

Help Support Arborist Forum:

Tree Freak

Tree Freak

ArboristSite Member

Addicted to ArboristSite

Tree Freak

Addicted to ArboristSite

Addicted to ArboristSite

Addicted to ArboristSite

Addicted to ArboristSite

[AS] OG

Addicted to ArboristSite

ArboristSite Operative

Tree Freak

Addicted to ArboristSite

Addicted to ArboristSite

Addicted to ArboristSite

Addicted to ArboristSite

Tree Freak

Tree Freak

Tree Freak

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!