husqvarna

Have some various parts saws for trade or sale . I’m in need of some 288 xp parts

Husqvarna 545 fully rebuilt from the crank up with all NEW OEM parts. Cylinder, piston, ring, bearings, seals, case gaskets, lines, filters, clutch drum, oil worm gear, .325/7T sprocket, spark plug, etc. Pressure and vac tested 100% using OEM Husqvarna block-off plates. I have video of it...

Husqvarna 545/550xp cylinder in excellent condition no transfer, scoring, or other damage. It still has the cross hatching in the cylinder from the factory. P/N 577 76 47-06 Also fits Jonsered CS2252/2253 $50 Shipped

Updated: 2014 Husqvarna 372XP XT. Starts and runs missing choke lever. Missing a few screws (1x on top cover & 1x on muffler bracket). Compression is ~140psi cold, the piston is worn, but isn't scored. This saw will make someone a great work saw or backup saw with a bit of minor maintenance. New...

Husqvarna 359 all OEM. Now has the upgraded metal intake clamp and gasket delete with a factory muffler modified to dual port. Clean and nice oils and runs great. $275 shipped to ConUS not including anyone in PST (PM for detailed shipping quote). If you have any questions just let me know!

Husqvarna 372XP OE converted to XPW (75cc) using brand new OEM Mahle P/C. Gasket delete and front ported muffler with full wrap bars and west coast spikes SEM unlimited (black) coil. $575 shipped in the ConUS unless in PST (contact me directly for exact shipping quote. PM if you have any questions.

Selling a Jonsered/Husqvarna bar and chain combo package $100 shipped in the ConUS unless in you live in PST, please just ask for a shipping quote. 1x 24" Jonsered branded bar with almost no use "B" mount 84 DL 3/8" pitch .058" 1x Jonsered branded chain NIB 2x Windsor branded chains NIB 4x...

So far I’m leaning towards the MS 462...what about you guys? The 372xp is the best current 70cc saw out there hands down...so deep down I kinda wanna get the 572xp but from what the videos show and on paper looks like Stihl may win in the 70cc range. I currently use an Echo CS500P 16” and a...

Can anyone tell me the inside and outside diameter of the fuel line for a Husqvarna 365? Mine have started to split causing fuel starvation issues and rather than swap for another OEM part I am planning to buy a reel of Tygon hose as I have 4 older huskys that would benefit from a replacement...

I have recently taken the saw apart to see what was wrong with is and it turned out the be more than I was want to deal with it needs completely rebuilt so it is being sold as parts $40+ S&H Would trade for case gasket and or seals and bearings for a 576xp and or ms460/ms461.

Hi to everyone on the forum This is my second post and as per the title I am concerned about the compression level my husqvarna 61 has. First off I rebuilt this saw totally from the bottom up. It has a gilardoni 48mm open port piston and cylinder with a new OEM ring. Essentially when rebuilding...

Hi everyone, I’ve been hanging around here a while soaking up all the knowledge you guys are kind enough to share but this is my first post. I’m sorry in advance if this post is a bit long but I just want to give as much information as possible in the hopes that someone can help me. I bought a...

I'm in need of a good used climbing saw. No cash, but I have a Dji Phantom 2 GoPro h3-3d video/photo drone in good shape paid well over $1000 for the drone and all it comes with. Let me know if anyone is willing to trade a chainsaw or two.

Hi, i have a husqvarna 435, but when i push the primer bulb 6 times,gas comes out of the tank vent.It starts very hard,runs good but stalls.I replaced the fuel lines and the filter too

As the title says. What are the your "must have" "Hi-Tech parts" ? 1.Is it the super light weight bars? 2.Is it the best powerful powerhead? 3. Is it the best chain? What is the saws, parts, Hi-Tech goodies that you had to have and if not, you would lose sleep over it. Also what do you like...

Hi.I have a husqvarna 136,but it's kinda weak.I am asking that is it even possible to put a Stihl engine in it?

I've been using chain saws for 50 years and I've never seen this happen. I went to start the saw and the chain was so tight it wouldn't turn. I checked the tensioner and it (the screw) wouldn't turn, even with quite a bit of force. The only thing different that I've been doing is using the saw...

Would like to get feed back on desire for an aftermarket Hightop and filter kit for 2 series Husqvarna and associated Jonsereds. Top cover would be injection molded likely in black. Filter kit would include a fresh design on the adapter out of aluminum. Filter would be a standard washable and...

Would like to get feed back on desire for an aftermarket Hightop and filter kit for 2 series Husqvarna and associated Jonsereds. Top cover would be injection molded likely in black. Filter kit would include a new fresh design on the adapter out of aluminum. Filter would be a standard washable...

For sale: rebuilt Walbro HD-6 carburetor. Husqvarna part no: 503 28 18.04 / 503281804 Originally from a 371 but these will fit a 362/365/371/372/372XP. Shipping from Belgium.