1/2" Chain

[Dennis Cahoon]

Any of you Okie, Hippie, Cowboy, Loggers got any of that old 1/2" chain for sale. No use having it sit around your shop and just looking at it. Get rid of that old crap. I"ll take it off your hands right now, cheap. Don't even think, that stuff is worth anything anymore, cause its not! I can pond it off to those stupid Aussie and Kiwi's that come over for the Timbersport series. I can make that 3/8s" run twice as fast anyway, so I"ll even trade you for some. So get off your ass's, and go look around for some. What ever you do though, don't sell any to John Lambert. He just does'nt have the saws, experience, or chain speed to use this type of chain. Feel free to phone me with the good news, that you have some and want to sell it or even give to me. All prank phone calls will be answered by my wife with the "?????in bod". Thanks Dennis 530-894-5826

 

[rbtree]

I think gyro ruined his, figgering it wuz the perfect chain for that dime tip 13 inch bar he keeps bragging about. He couldnt figger out why it kept jumping out of the rails when he was stump jumping those 1/2 inch pecker poles on his recent huge govt contract line clearing job that he only got cause he used a clean sample from Silverblue for the obligatory U.A.

But since that 94 hp 346 throws chain a Canookien kuntry kilometter ( only a little less than the Predator) the evidence could not be found.

Poor fella had to finish the job with a dull Fanno handsaw
he conned Silverblue out of.....


Don't anybody trust the sawed off runt....I won a couple ebay auctions of his a while back, supposedly some high falutin' hopped up orange saws, but look what the UPS guy brung.....

 

[SilverBlue]

 

[Gypo Logger]

Hi Dennis, here is Dennis, RB's foreman. Anyway Dennis is happy with the 48 Bud Lights I traded him for a 100 ft. reel of 1/2" chisel he found in Pauls saw shop.
John

 

[Bill G]

I had a roll of Stihl 1/2 chain. It sat around here for quite ahile so I decided to get rid of it. I figured "what the he'' am I going to do with it " Looking back now I wish I would have kept it.

Bill

 

[WoodTick007]

Theres an old hardware near my camp that has at least a couple rolls of 1/2 inch. Whats it worth? Let me know and I will be up there deer hunting next week and will see if I they will take your offer. I will ship at cost.

 

[Dennis]

I have a 100' roll of 1/2" chipper...how about 2 bucks a driver...usd of course

 

[Dennis Cahoon]

Dennis, You can sell that "chipper chain" to Art Martin. I want "chiesel bit" #9 or #10, Stihl,Oregon, or Mccullugh chain. Pre sets or teeth also. $2.00 Canadain, a lets see, thats about $.50 US., No problem. Oh, and who ever complained to you about the B.A. picture, get a life! One of my nicknames was expressed in that picture, Full Moon Cahoon. P.S. You don't really have any 1/2" or roller noses do you. Dennis

 

[cliff-1972]

I got like 16ft of Carlton 1/2" chain.It's round though.It is new and I have the links for it also.

 

[Dennis]

Dennis C. I do have round 1/2" ...and I already know that isn't what you want as I have scoured the country for 1/2 chisel as well...it was meant in humor....I am still looking through my dads boxes of Remington stuff...just haven't been around alot lately at the store...but if I do find some I will give ya a shout....

As far as the pic goes, I laughed...but we have almost 4000 members now, and some of them don't like those types of pics....and I agree with you...but when a person complains, its my job to deal with it, and also my job to keep the sponsors happy, as they foot the bill for this site. I have had to get rid of Lambert and Rotax's naked behinds' more times than I can count.....and unfortunately seen them in person...I am still scarred

 

[Dennis Cahoon]

WoodTick 007, Your E-mail is blocked. Send it to me , or your telephone # and we'll talk. Thanks Dennis

 

[Gypo Logger]

The reason I dont have a rooster tail in that picture is because I finished the cut already- note the disc just dropping off.
John

 

[ccicora]

Do you really half to subject us to these displays of childness?? Besides if you are going to do that PLEASE put it up as a link with some type of ZZZ catigory. Sorry to be X or higher the life form must be identifyable.

Best regards,
Chris

 

[eyolf]

Seems to me there's an opportunity here for someone. Somewhere, somehow, somebody has access to the equipment and expertise to make a run of quality 1/2" chisel, and could probably reasonably expect to get premium plus price for it.

Even if there are some laws against selling the chain (ansi safety standards?) seems to me you could sell drivers, links, cutters and rivets and assemble it yourself. Suppose selling cutters @ $1, drivers, links, & rivets @ $10/lb....

 

[Dennis Cahoon]

Rooster spray

Here's some more flakes a flyin in Chester, Ca.

 

[Dennis Cahoon]

TIMBERRRRRR!!!!!

Yuck this up you east coast wantabes. Marky, have you got a saw that will cut something like that? Ah what the hell, I've got an axe and misery whip just in case you want to keep the noise down. Put Gypho on the other end of the whip and I'll take pictures of you east coast Mafiosio's stealing one. Then I'll have a record, just in case I ever build you guys a crappy saw. The new Gypho Logger!!!

 

[Dennis Cahoon]

The real Gypho Logger

Jon, Any chance I can borrow your loader. I'm getting tired of denting up my truck loading these big sugar pine. Or how about you Babcock, buy me one of those Hi-tec computerized one's. This 16' log had about 1500 bft.

 

[Rotax Robert]

Here's some more flakes a flyin in Chester, Ca.

Here's some more flakes a flyin in Chester, Ca. ???

D.C. push down harder...you have poswer to spare

Nice Pic

 

[Dennis Cahoon]

Thanks, as you can tell I can't run a computer as well as a chainsaw. But I'll keep trying. Dennis

 

[Gypo Logger]

Hey Dennis, when are you going to grow up?? Dont be so childish eh! Glad all you saw builders aren't all alike. Stop pissin people off Dennis!
John