'15 Echo CS620PW Information

[cobey]

Thank you for your words

Hey Reed, do you got a 600 out to be ported ?

 

[BGE541]

Hey Reed, do you got a 600 out to be ported ?

Maybe Yeah I have been talking to Mitch (mweda1) for awhile... was supposed to have a saw ported a while back but didnt work out so sent him a 600 since the other ones still under warranty.

I am very very happy with all of rattler362 work and need to send one his way as well. .. I want him to get his grinder on an Echo!!!

 

[cobey]

Sweet, I have seen one of his 600's run in Iowa

 

[BGE541]

Sweet, I have seen one of his 600's run in Iowa

What you tgink of it?!

 

[cobey]

What you tgink of it?!

Looked like it ran good.
Huskys are race saws........ echos pull hard and run strong!
General thing is if you want a take no prisoner's race saw..... build a husky
Not disrespecting our wonderful echo' s but this is what I have seen in race cants
Weba builds a strong saw

 

[BGE541]

Yes I must admit that Rattlers huskys pull like freight trains and hit hard... but like in life their must be balance so for the get it cut/bucked/sawn I'd like the echos to rip as hard as they can while still being rock solid...

 

[cobey]

The 620's unlimited coil would make tuning
Way better!

 

[BGE541]

Ill put a tach on it and see if its worth throwing $85 at for an unlimited coil

 

[cobey]

Yes I must admit that Rattlers huskys pull like freight trains and hit hard... but like in life their must be balance so for the get it cut/bucked/sawn I'd like the echos to rip as hard as they can while still being rock solid...

Totally how I feel I race stock and vintage saws, I never had a dog in the hunt
For modded saws. My modded 590 pulls harder than my 68cc Lombards
And several of my 70 to 75 cc saws ........

 

[cobey]

Ill put a tach on it and see if its worth throwing $85 at for an unlimited coil

Sweet !!!!!!!!

 

[BGE541]

Totally how I feel I race stock and vintage saws, I never had a dog in the hunt
For modded saws. My modded 590 pulls harder than my 68cc Lombards
And several of my 70 to 75 cc saws ........

I hear you... those huskys and the echos are just those saws you run hard and always put a smile on your face and wood on the ground...

 

[cobey]

Sorry don't mean to derail our echo thread

 

[BGE541]

Can we request a tag or pinned or what not from a mod? Thanks mods

 

[cobey]

Can we request a tag or pinned or what not from a mod? Thanks mods

we
Need to find the echo info AWOL put on one of 590 threads, timing
Numbers and stuff....

 

[BGE541]

Thought they were a few pages back... 17 or 18 maybe?!?

 

[BGE541]

we
Need to find the echo info AWOL put on one of 590 threads, timing
Numbers and stuff....

Found it...

Do you mean there is no difference in porting between the 590 and 600, or between the 600 and 620? There is much difference between the 590 and 600 timing numbers, as I have ported more than one of each. The transfer tunnels and upper outlets are also shaped different, and the cylinders are different part numbers. Here are the stock timing numbers:
600P
EX 113/134
In 102/156 or 78 from tdc
TR 133/94


590
EX 113/134
IN 103/154 or 77 from tdc
TR 128/104

 

[cobey]

Hi Wayne (fishnuts2) did you find a 590 or 600 yet?????

 

[jughead500]

Gonna ask here before it goes to the tradin post.who wants my 600p? $475 plus shipping? Comes muffler modded, gasket delete, broken in, ready to noodle with an echo carrying bag an 20" replaceable nose husky bar and 3/8 stihl chain.comes with both 7 PIN and 8 PIN sprockets.this is my personal saw and to make it more special it has soaked up my Sasquatch strength and is almost up to par with the masterminded version.it has only taken one giant leap for saw kind to get out of harms way.this is the saw that makes Norwegian sawtrolls cringe in fear.
Ok im full of horse hockey tonight but the saw is for sail because I'm a broke sailor.pictures about midnight tomorrow.

 

[SAWMIKAZE]

Whats the 620 limited at reed ?

 

[cobey]

Whats the 620 limited at reed ?

It has an unlimited coil