'15 Echo CS620PW Information

[fordf150]

Whats missing here? Figured while I replace the tank and other goodies why not... squish now at .027" View attachment 439159

reed, just curious. is that orange high heat silicone you used on the base of your echo there? you need an anaerobic sealant for that application. silicone will work but not forever. i should also point out that 2 strokes aren't built to take heat. 4 strokes actually run much much hotter. to much heat in a 2 stroke and that's when things start cooking together, kinda like that 372.

How did we all miss that

 

[BGE541]

Its Dirko...

http://www.elring.de/fileadmin/Date...e_Dichtmassen/Dirko_HT/Elring_Dirko_HT_en.pdf

 

[Idahonative]

Its Dirko...

http://www.elring.de/fileadmin/Date...e_Dichtmassen/Dirko_HT/Elring_Dirko_HT_en.pdf

Porsche uses it. If it's good enough for them I''m pretty sure it'll be ok for chainsaws as well.

 

[BGE541]

Porsche uses it. If it's good enough for them I''m pretty sure it'll be ok for chainsaws as well.

When you headed out this way?

 

[Big Block]

So I welded up that hole in my muffler. Much more tolerable noise wise. I'm going to add a second port now right out the front when I get some time. As of now it's a stock muffler with the rear facing baffle cut out of the deflector.

 

[BGE541]

So I welded up that hole in my muffler. Much more tolerable noise wise. I'm going to add a second port now right out the front when I get some time. As of now it's a stock muffler with the rear facing baffle cut out of the deflector.

I don't understand, you want it to be quiet? lol

 

[Big Block]

I was at the point I was wearing plugs and muffs. It was fun for a while I think a dp would be an equal performance gain without rattling my brain

 

[Idahonative]

When you headed out this way?

Haha...the more pressing question is, when are you going to get those vids loaded on here?

 

[BGE541]

Haha...the more pressing question is, when are you going to get those vids loaded on here?

Ha, well lets say the parts orders are running me in circles... got a new tank, came out that it doesn't have the same carb bolt holes as the other (original tank) they not use a steel insert which is important because it was THE WRONG THREAD PITCH!!! Talk about lame... so brought it back my dealer is coving it and new carb bolt for me... Meanwhile I soldered the old tank together then uses JB Weld Water or whatever that stuff is called (curing now) so hopefully I can use a tank sometime this year. Also needed to order an extra AV spring and a plastic piece that I left on BigBlocks Full Wrap that I guess I needed to mount the half wrap!!! So that's my reason, what's yours? I know your busy but just got a Echo 310 for my buddy as his little saw and rebuilding this 455 Rancher so both are getting some love...

 

[ffchewy17]

Any one purchased the bar mount adaptor from Homelite410? I'm looking to mount an Oregon reduced weight bar at 28" 3/8 .063 283RWDD025. It's a Stihl mount for my current ms461. I know it's a lot of bar for the saw, but I want it mainly for in tree removals. I tried a new Stihl 362 and was not impressed at all for the price. Looking pretty hard at the CS 620PW.

Thanks

 

[Homelite410]

Any one purchased the bar mount adaptor from Homelite410? I'm looking to mount an Oregon reduced weight bar at 28" 3/8 .063 283RWDD025. It's a Stihl mount for my current ms461. I know it's a lot of bar for the saw, but I want it mainly for in tree removals. I tried a new Stihl 362 and was not impressed at all for the price. Looking pretty hard at the CS 620PW.

Thanks

Contact Nate (ford f150), I'm shipping them out today.

 

[ffchewy17]

Thank you

 

[Homelite410]

I'd be more than happy to send you one but I will not take business from my customer!

 

[BGE541]

@fordf150

You going to offer the bar adaptors on here? (This thread?)

 

[fordf150]

I am going to get my hands on some and show off my new 620PW with a 20" total super bar for a week or so then i will post the adapters for sale.

 

[Homelite410]

I am going to get my hands on some and show off my new 620PW with a 20" total super bar for a week or so then i will post the adapters for sale.

They are in the mail Nate!

 

[Deleted member 83629]

sorry to say guys i sold my old man the 590 he needed a felling saw and im not really at a loss he seems excited by it i let it go cheap
but he is my old man.

 

[fordf150]

What do you think?

 

[hoskvarna]

Sweet


Sent from my iPhone using Tapatalk

 

[porsche965]

I want to hear what Nate thinks once he sinks this bad boy in some hard wood since he has a 6100.