'15 Echo CS620PW Information
- Thread starter BGE541
- Start date
Help Support Arborist Forum:
bikemike
loud pipes save lives
Ok IL try to take a vid of the 360t in 11 below Temps. With windchill negative 24. Wood dont cut the same at those Temps
CoreyB
Addicted to ArboristSite
I don't have an echo but I want to join in all the rain deer games.
This is a barn find 056 super I have tried bringing back to life. New carb kit, (first carb i ever messed with) clean up, plug ,ect. And my stock dolmar 6100. Maybe this spring I can get to a gtg and get a video with a 620 against the 6100.
This is a barn find 056 super I have tried bringing back to life. New carb kit, (first carb i ever messed with) clean up, plug ,ect. And my stock dolmar 6100. Maybe this spring I can get to a gtg and get a video with a 620 against the 6100.
bikemike
loud pipes save lives
That dolmar sounds nice and snappy
awol
ArboristSite Guru
I ran over five gallons of mix through my 600P last week, pulling a 30" bar in some old dead pasture oaks. The 562xp has become my limbing saw, and the Echo does the felling, bucking, and noodling.
No vids to post, but the Echo can be seen in this pic.
No vids to post, but the Echo can be seen in this pic.
Chris J.
Addicted to ArboristSite
Echo CS-590 for $240.00.
I don't know if the seller would be willing to ship, but this CL ad might be of interest to some of you. I don't need it, and it'd be a long drive, mileage & time.
http://houston.craigslist.org/tls/5408865338.html
I don't know if the seller would be willing to ship, but this CL ad might be of interest to some of you. I don't need it, and it'd be a long drive, mileage & time.
http://houston.craigslist.org/tls/5408865338.html
bikemike
loud pipes save lives
Ok here it is better get your popcorn and beer this thing is slow
I'd be nice to have a top handle...
Chris J.
Addicted to ArboristSite
Seems like a handy saw to have. IRRC someone posted that there isn't much difference in the performance between the 330T and the 360T. I'm curious because my searches indicate that the 330T is much more common (available used) than the 360T.
bikemike
loud pipes save lives
Yeah I'm not sure but the 330 came out before 360 and was sold after they took the 360 off the shelfs.. my wife brought me in to gerlachs for x Mas and lead me over to the echo wall. She said take ur pick. I could have got the smallest of top handle saws up to the big dog rear handle. I took the biggest most **** talked saw cause I'm like that. I know small engines and everything described in reviews was a poor running and gutless. That made me smile and grin. I figured there is no replacement for displacement and grabbed the 360 while the whole time staff was telling me to get the 355t. Well I'm not epa and OEM everything. I think outside the box and knew that saw will get the results I'm looking for. Everything I did to my saw has worked well and never even took the engine out nor opened up the engine. I have zero regrets of getting the saw I chose. It makes lots of torque and not afraid that it will fail me in a tree or on the ground
bikemike
loud pipes save lives
Smaller wood for those that say need a bigger saw
bikemike
loud pipes save lives
Sorry wrong vid here it is
Big Block
WFO or I don't go
BUMP!!!
still slacking I will try this weekend. I still have to tune it and I am going to slap a sharp chain on it and we will see what it can do.
Have a good weekend friends
still slacking I will try this weekend. I still have to tune it and I am going to slap a sharp chain on it and we will see what it can do.
Have a good weekend friends
Hi Cody hope all is good with you.
Sent from my XT1060 using Tapatalk
Sent from my XT1060 using Tapatalk
Big Block
WFO or I don't go
Hello Mike all is well thank you. Same to you bud
Thank you Cody
Sent from my XT1060 using Tapatalk
Sent from my XT1060 using Tapatalk
