2-man saw thread

[huck01955]

You've convinced me. Here's a short vid of it running before I replaced the carb with a NOS AJ13B: Early Hornet HJ - YouTube Still needs a little of this and that. What it really needs is one of your restorations! You obviously do some very nice work!
Igpoe

It is an HJ for sure what a great saw thanks for sharing it And thank for the great comments I wish I had an HJ some day

 

[sawbones]

Here is my Mercury Disston DA 211 I just got.

Did you check your bars yet to see if they have a logo?

I just cleaned this one and used saftey orange to highlght the logo. It is identical now to original logo color.

 

[sawbones]

A very nice saw Cliff - congrats. I hope to find a nice example of a 211 someday.

Chris.

 

[HELSEL]

Yea, I think the missing piece may be a dummy bar to keep from up cutting and slinging the bar/chain up into your face.

There is a picture of 2 Malls that belong to IGPOE.


http://www.arboristsite.com/showthread.php?t=135281&highlight=heritage+festival&page=2
And a couple of 2 man videos and pictures.
Malls, Mercurys, Poulans... Husky

What is the Mall with 2 fuel caps??

Thanks

 

[huck01955]

Very nice thanks for sharing

 

[igpoe]

What is the Mall with 2 fuel caps??

Thanks

I'm surprised no one ever noticed. It's a 6 that someone added an oil tank to. No pump involved, just free gravity flow which works OK until shavings block the passage.
Igpoe

 

[huck01955]

IEL Model M

Not my saw belongs to MR IEL [video=youtube_share;1AAlTmICiSA]http://youtu.be/1AAlTmICiSA[/video]

 

[igpoe]

Not my saw belongs to MR IEL [video=youtube_share;1AAlTmICiSA]http://youtu.be/1AAlTmICiSA[/video]

Wow, Huck, is either of those gentilemen in the vid, Kevin? And how long ago would you say that vid was? I think I recognise the saw.
It's cutting sweet!
Igpoe

 

[sawbones]

Just drug this 6 out for pics a few days ago.

This is the saw Natalie Amber tore down and cleaned out the bottom end on.
Had some crud in the bottom and would not run right.

Have never ran it since then.

 

[huck01955]

Wow, Huck, is either of those gentilemen in the vid, Kevin? And how long ago would you say that vid was? I think I recognise the saw.
It's cutting sweet!
Igpoe

Hello it is about there years old Kev is on the right check out his Diesel under Antique Saw

 

[HELSEL]

I'm surprised no one ever noticed. It's a 6 that someone added an oil tank to. No pump involved, just free gravity flow which works OK until shavings block the passage.
Igpoe

I have one that looks like it. Mine looks
like it came from the factory that way.
Could have they made some that way??
I have a lot of the 2 mans. A lot more
one mans.

 

[Mr. Bow Saw]

Did you check your bars yet to see if they have a logo?

I just cleaned this one and used saftey orange to highlght the logo. It is identical now to original logo color.

Its there, I cleaned some of the rust off and I can see it.

Did you spray the orange on and then wipe the excess off?

 

[Mr. Bow Saw]

I'm surprised no one ever noticed. It's a 6 that someone added an oil tank to. No pump involved, just free gravity flow which works OK until shavings block the passage.
Igpoe

I have one that looks like it. Mine looks
like it came from the factory that way.
Could have they made some that way??
I have a lot of the 2 mans. A lot more
one mans.

I saw one like this for sale on ebay 4 or 5 years ago.
The oil tank was on the same side as the one in the pic.

 

[sawbones]

Its there, I cleaned some of the rust off and I can see it.

Did you spray the orange on and then wipe the excess off?

After wire wheeling the bar I spayed a couple coats and after letting it dry I sanded it down.

same deal on the mac goose bars.

 

[HELSEL]

I saw one like this for sale on ebay 4 or 5 years ago.
The oil tank was on the same side as the one in the pic.

Mine tappers down where the oil tank
and fuel tank meet But there are no welds and has a
devider in the tank. The brass tag is
In place ??

 

[igpoe]

I have one that looks like it. Mine looks
like it came from the factory that way.
Could have they made some that way??
I have a lot of the 2 mans. A lot more
one mans.

Mine looks like such a smooth job that it may very well have been done at the factory. But I have no way of knowing for sure. Mine appears to have the original paint, at least what hasn't been chipped off over the years.
Igpoe

 

[huck01955]

Its there, I cleaned some of the rust off and I can see it.

Did you spray the orange on and then wipe the excess off?

Wow very nice Cliff

 

[CM76]

Typical Bones, typical................

Nice collection of 211's you have there

Chris.

 

[stihlboy]

this is the saw rick is talking about

 

[HELSEL]

Hey thanks for putting them on SB

Rick