mainewoods
Addicted to ArboristSite
I figure if someone sends me 3 or 4 pm's, in rapid enough succession to "win" the gift, they must want (need) it pretty bad.
2016 Christmas giveaway
- Thread starter jerrycmorrow
- Start date
Help Support Arborist Forum:
dougand3
Addicted to ArboristSite
Poulan / Craftsman Fuel Line Kit - fits most any 42cc or smaller saw from 1990-2010. Free Shipping to lower 48. Specify in PM which purge bulb is needed - Snap In or Screw In. Merry Christmas.
I have 2 Homelite bars for the Christmas give-a-way. 1 is a 16" bar with no markings that I can find. The other is an 18" bar with a anti-kick back guard. Both are 3/8" pitch. As this is a Christmas give-a-way, postage is on me for state side shipping.
dougand3
Addicted to ArboristSite
The Homelite bars are A061 Mount. Fitment:
Homelite - 180 SERIES, 190, 192, BANDIT, CLASSIC 192, ELECTRIC 200, 240, 240SL, 245 (BEFORE #XE339), LITTLE RED, LX-30, SUPER 2, SUPER 2CC, VI SUPER 2, XEL-14, XEL ELECTRIC, XL, XL2 (AFTER #504-2001), XL-2CC, XL-10, XL-14, XL-16.
Homelite - 180 SERIES, 190, 192, BANDIT, CLASSIC 192, ELECTRIC 200, 240, 240SL, 245 (BEFORE #XE339), LITTLE RED, LX-30, SUPER 2, SUPER 2CC, VI SUPER 2, XEL-14, XEL ELECTRIC, XL, XL2 (AFTER #504-2001), XL-2CC, XL-10, XL-14, XL-16.
dougand3
Addicted to ArboristSite
Poulan Fuel Line Kits claimed by djones and alabamatriker. Merry Christmas all.
Two loops of GB R43S (3/8LP, .043, semi-chisel). You tell me how many drive links, I spin ‘em up and send ‘em to you. You pay postage on a USPS Flat Rate box ($6.80).
Homelitexl903
CAD...The struggle is real.
I think this thread is great. I like the ideas and suggested rules to keep things fair. I also think it's a good idea when people say the item is gone and which member received it. I have a pile of poulans and older homelite top handles. This weekend I will see what models I have and offer them as a parts saw or just certain parts that are easy and quick to take off to lower shipping costs.
astnmacgto
Carnac The Magnificent
I will do for the Christmas giveaway 1 or 2 package of 5 chains. Oregon full chisel non safety 3/8 .050 in 72 or 84 drivelinks. they are one time use (only been used one time) chains in very good condition, may require a touch up with a file but most will probably run like they are. they are off of husqvarna 455 and 460 saws with 20" and 24" bars respctively. I will do all 24, 20, or mix of whatever you want. The close up is to show you what you are getting chain wise. They are dirty. recipient pays shipping.
Also will give away this homelite bar scabbard, pretty good shape just super dirty. also recipient pays shipping.
Also will give away this homelite bar scabbard, pretty good shape just super dirty. also recipient pays shipping.
MS460WOODCHUCK
Addicted to ArboristSite
I sure could use some 84dl chains!
Nice going guys! Lets hope it stay gentlemanly. I'll have a look to see what I've got too.
astnmacgto
Carnac The Magnificent
Edit: I wasn't going to mention it but I guess I will anyway. anybody is more than welcome to put in a claim on these chains. I am going to keep a running list of people and after a week or so I will draw a name. Keeps it all fair! PM me if you would like a shot at em.
ADLM
I'm going to put a few things on here. Here is the first one.
Lightly used Oregon 064 pattern 14" bar for 1/4" pitch chain. This fits the older EMAB built small saws badged as Skil/Husky/Jonsered/Pioneer/Partner and others.
I'll cover the ride to anywhere in the US. First person to claim gets it.
Lightly used Oregon 064 pattern 14" bar for 1/4" pitch chain. This fits the older EMAB built small saws badged as Skil/Husky/Jonsered/Pioneer/Partner and others.
I'll cover the ride to anywhere in the US. First person to claim gets it.
jtGenerator
ArboristSite Lurker
Rules? Rules? We don't need no stinkin' rules!
~~ Santa
~~ Santa
James Miller
Addicted to ArboristSite
Iv got a 3/8 .050 20 inch farm tough bar. I'll pay shipping in the US. Not much but I don't have much just like what this threads about.
astnmacgto
Carnac The Magnificent
It's the little things, everything is worth something to somebody. good gift though regardless
brandonstc6
Addicted to ArboristSite
This is the electric saw I'm giving away. It's a pretty good one. There is one small piece broke out of the plastic in the handle but it doesn't affect anything at all.
Sent from my iPhone using Tapatalk
Unused Oregon .325 sprocket nose. Came on a bar that was immediately converted to 3/8. Includes shipping to anywhere in the US to the first person who claims.
Who is the manufacturer of this? I may have a parts saw to give to the winner.
This is the electric saw I'm giving away. It's a pretty good one. There is one small piece broke out of the plastic in the handle but it doesn't affect anything at all.
Sent from my iPhone using Tapatalk
brandonstc6
Addicted to ArboristSite
Ok then I don't have a parts saw. (Sorry to muddle the thread!)I believe it is made by skil electric company. I don't know if someone made it for them tho.
Sent from my iPhone using Tapatalk
