346xp = 3/8" --- Sorry Dumb ? of the Day

[Rydaddy]

Okay,

I would like to switch my 346xp over to 3/8" chain. What part(s) do I have to buy, and what tools would I need to do it. I have researched this, and even purchased some items from Bailey's, but I think I am more confused then before I started?

Thanks!!!

 

[Freakingstang]

you need the 3/8 rim and the 3/8 bar or if you have an oregon powermatch you could get away with swapping the nose. Otherwise, you just need the bar

 

[Rydaddy]

...

Thanks Freak.

Bailey's has the "Rim/Drum" available and I was wondering If I had to buy that complete unit or If I could just replace the rim. Gracias.

 

[Uwharrie]

The only tool you need is the clutch removal tool.
http://www.amickssuperstore.com/Husqvarna_5025_416_03_Clutch_Removal_Tool_p/husqvarna%205025%20416%2003.htm

You can get a Dolmar bar and chain combo that fits the 346 so you will have the same chains on both saws. Helps to elimate confusion.

http://www.amickssuperstore.com/Dolmar_18_Bar_Chain_and_Sprocket_Combo_p/dolmar%2018%20inch%203-fslash-8%20combo.htm

You can replace only the rim if your saw has the floating rim sprocket, and most of them do. The Rim in the kit above will fit it.