Bottom of chain catcher base was chipped away so figured to build it up with epoxy. Made a clay dam, smeared in JB Weld after decreasing and gently torching dry. Wasn't really necessary but I'm enjoying this project saw so trying to do it somewhat right.
This pin was also wobbly so I tapped it out and while I had wet epoxy I smeared a bit on the pin and tapped back in.
Then I have to fix this.
And this
And this
This pin was also wobbly so I tapped it out and while I had wet epoxy I smeared a bit on the pin and tapped back in.
Then I have to fix this.
And this
And this
