441 Limiter Cap Question - New saw pics

[Lakeside53]

Probably not so... and even on the H there is less reason than on prior saws... I sometimes pull them and just set them an 1/8 more to the richer to get more adjustrment range.

Stay away from the edge...

 

[PA Plumber]

Stay away from the edge...

My plan is to run a few tanks through it and see if it is leaning out. I will try to keep the H side just under 13,000.

 

[Canyon Angler]

I have the Stihl tool to pull the limiter caps out of my 361 but I'm curious -- can the caps be pulled out through those black plastic "tubes" that lead to the outside of the saw, or do you need to move the black plastic tubes out of the way by partially disassembling the saw? :help:

 

[Tree Sling'r]

I remove mine first thing. I normally need more high and low then the caps will allow.
I use a wood screw, screw it in a little ways in one of the caps then take some pliers and pull it out. Normally the cap and the aluminum insert come out. I then take some needle nose pliers and remove the other cap.
But, then again I am in different circumstances then many of you.

 

[dtnodya]

This has nothing to do with L-caps ... that's a sweet saw!!!!!

 

[bobbyb13]

See what I mean.

This is what I like about this place. Men going out of their way to help someone they don't even know, get squared away. Hat's off to ya'll.