A Tale of Three Saws

[2000ssm6]

I'll bring my 066 and whip ya both. Nuttin' but an appetizer:hmm3grin2orange:

LOL, better pack a lunch to go along with that appetizer.

 

[little possum]

No need to port it when it outcuts the 660s anyways... :notrolls2:

Maybe oneday.

 

[blsnelling]

LOL, better pack a lunch to go along with that appetizer.

I was hoping you'd bring a MS880 for lunch:hmm3grin2orange:

 

[AUSSIE1]

Yea, Id hate to see a stock, wore out ol loggers 394 eat a ported 660 for breakfast, lunch and supper

Now 2k you know that wouldnt be fair.(yet)

From memory that 'Ole 394 ran very well.

Where's that vid 'Lil pos?

 

[parrisw]

:jawdrop:
Ive got one

Well. currently, only 1 runs, one is on the bench getting the full meal deal, the other is next, then the last one, well, is worse off then the one I'm doing now, it needs a full rebuild too, but it'll get it.

Oh did I mention I got a 394 too, used to have 2 of those, but sold one a few moths back.

Since I doubt me and Will can get together for my 660 to eat his 395 alive, yours will do.

ha ha. after I'm done opening a can of whoop ass on the 660 with my 395, I'll let my 371 have a turn too!! LOL in 20" wood though

 

[2000ssm6]

ha ha. after I'm done opening a can of whoop ass on the 660 with my 395, I'll let my 371 have a turn too!! LOL in 20" wood though

I'll take the 371 with the old 026, no problem.:biggrinbounce2:

 

[little possum]

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/Bc8zhRVSkAU&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Bc8zhRVSkAU&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>

There is that ol pig

I may have a line on another toasted 394.

 

[parrisw]

I'll take the 371 with the old 026, no problem.:biggrinbounce2:

ha ha. Sure

You can talk the talk, but I aint never seen you post anything up showing off your fast saws. Lets see it!

There is that ol pig

I may have a line on another toasted 394.

Hmmm. Looks like I'm getting another one too!!! LOL

 

[little possum]

ha ha. Sure

You can talk the talk, but I aint never seen you post anything up showing off your fast saws. Lets see it!

I got some pictures of him running a 390xp, and he was grinning from ear to ear when he felt all that power :monkey:

Just messin, 2k does have some quick saws

 

[parrisw]

I got some pictures of him running a 390xp, and he was grinning from ear to ear when he felt all that power :monkey:

Just messin, 2k does have some quick saws

I'm sure he does. Just never seen it.

 

[wigglesworth]

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/Bc8zhRVSkAU&amp;hl=en_US&amp;fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/Bc8zhRVSkAU&amp;hl=en_US&amp;fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

That 394 looks like its running pretty good Zach.

My grandma runs one just like it, but I think hers is a tad bit faster.

 

[little possum]

That 394 looks like its running pretty good Zach.

My grandma runs one just like it, but I think hers is a tad bit faster.

Id like to meet her, and shake her hand, well maybe not, she might break my fingers.

 

[MCW]

Sorry for dragging up an old thread but not having a decent go on the modded MS660 had left me feeling a bit hollow inside
So Brad is doing another one for me. The only difference will be that it will be fitted with a modded BB kit. I got my grubby little mitts on some MS660 BB kits (99cc) with an exceptional finish so have posted one to Brad. The standard internals will be removed and these will not see any use at all - the reasoning for this is resale value. If I decide to sell the saw later factory stock internals will raise the resale significantly.
I was planning to buy a new, local MS660 to try a BB kit on but the Stihl Australia $200 cash back has ended. For the price of a new MS660 here I can land a modded one from the states for about AUD$150 cheaper. Warranty isn't a concern as by fitting a BB kit the Australian warranty would be void anyway.
Looking forward to it's arrival and this time will post vids although the comparison to my 390XP won't be quite as fair with an 10 extra cc for the Stihl I'll keep everybody posted.

 

[FATGUY]

the last one was a monster. I remember Andre literally putting his knee into it. I bet this one's gonna be even stronger!

 

[MCW]

the last one was a monster. I remember Andre literally putting his knee into it. I bet this one's gonna be even stronger!

Hi Nik.
It'll be a lot stronger if you're game enough to do a pop up for me Seriously!
Thanks, knew you would...
Matt

 

[FATGUY]

Hi Nik.
It'll be a lot stronger if you're game enough to do a pop up for me Seriously!
Thanks, knew you would...
Matt

 

[MCW]

Cool I hope the piston is good enough. The whole setup is excellent. Even a better finish than the factory P&C from the last 660. These little Chinamen are getting pretty good. I also got a couple of 372XP BB kits with a good finish. Very impressive. Not Mahle impressive but pretty damn close.
I'm in for the pop up if you and Brad are!

 

[FATGUY]

Cool I hope the piston is good enough. The whole setup is excellent. Even a better finish than the factory P&C from the last 660. These little Chinamen are getting pretty good. I also got a couple of 372XP BB kits with a good finish. Very impressive. Not Mahle impressive but pretty damn close.
I'm in for the pop up if you and Brad are!

this is a work saw so we'll go as big as is safe. Is the piston domed or flat?

 

[MCW]

this is a work saw so we'll go as big as is safe. Is the piston domed or flat?

Flat or ??

 

[FATGUY]

Flat or ??

is the crown a dome (hemispherical) or is it flat?